Central Machinery 63366 Owner's Manual & Safety Instructions

Central Machinery 63366 Owner's Manual & Safety Instructions

5 ton log sputter

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23b

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 63366 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Central Machinery 63366

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2: Specifications

    Nonslip footwear is recommended. be kept safe distance from work area. Wear protective hair covering to contain long hair. 5. MAKE WORKSHOP KID PROOF with padlocks, master switches, or by removing starter keys. Page 2 For technical questions, please call 1-888-866-5797. Item 63366...
  • Page 3 Harbor Freight Tools for a replacement. and could cause pieces of log to be thrown, injuring the operator or bystanders. 18. Avoid unintentional starting. Prepare to begin work before turning on the tool. Item 63366 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4: Grounding Instructions

    5. Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool’s plug. Page 4 For technical questions, please call 1-888-866-5797. Item 63366...
  • Page 5: Extension Cords

    6. If you are using an extension cord outdoors, make 150% of the rated amperes. sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. Item 63366 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 1. Insert the Control Handle through the Handle slot in the Shield and into the shaft Shield on the Control Handle Bracket. 2. Turn the Control Handle to tighten in place. control Handle Bracket Page 6 For technical questions, please call 1-888-866-5797. Item 63366...
  • Page 7 Functions cutting Wedge Lift Handle control Handle power Switch power cord Guide plate Vent plug Dipstick rubber Feet Front Leg Item 63366 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8: Tool Set Up

    7. Use the Lift Handle to return the unit to its normal, horizontal operating position. 8. Replace Control Handle. Figure B: checking / adding Fluid 9. Plug in the Power Cord. 10. Remove Vent Plug. Page 8 For technical questions, please call 1-888-866-5797. Item 63366...
  • Page 9: Workpiece And Work Area Set Up

    Wedge. Manually 3. Remove the stuck log from the Cutting split with a maul, or cut with a chainsaw. Wedge manually with a pry bar. Item 63366 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10: Maintenance And Servicing

    (Do not check for leaks during operation.) tool is damaged, it must be replaced only • any other condition that may by a qualified service technician. affect its safe operation. Page 10 For technical questions, please call 1-888-866-5797. Item 63366...
  • Page 11: Bleeding The Hydraulic System

    Remove and check the fluid 11. Unplug the Power Cord. level; add fluid as needed to bring fluid level within the two marks on the Dipstick. Refer to Figure A: Dipstick on page 8. Item 63366 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12: Troubleshooting

    3. Tighten the Dipstick. 4. Hydraulic fittings and/or 4. Have qualified technician service tool. seals are worn. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 12 For technical questions, please call 1-888-866-5797. Item 63366...
  • Page 13: Please Read The Following Carefully

    Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Visit harborfreight.com/parts for a list of in stock parts. Reference UPC  1 93175475459. Item 63366 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14: Parts List And Diagram

    O-Ring Ø18 x 1.9 Short Lever Copper Seal Washer M14 x 1 Wheel Fluid Tube Screw M14 x 30 Flat Washer M10 x 1 Inner Hex Bolt M8 x 20 Lock Nut M10 Spring Washer M8 x 2.3 O-Ring Ø28 x 2.4 Hydraulic Pump Page 14 For technical questions, please call 1-888-866-5797. Item 63366...
  • Page 15: Assembly Diagram

    Diagram Item 63366 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16: Limited 90-Day Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents