Table of Contents
Advertisement
FUNCTIONAL DESCRIPTION
Specifications
Log Cutting Capacity
(Maximum)
Minimum Log Length
Ram Stroke
INITIAL TOOL SET UP/
ASSEMBLY
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagrams near
the end of this manual.
Unpacking
When unpacking, make sure that
the item is intact and undamaged. If any
parts are missing or broken, please call
Harbor Freight Tools at 1-888-866-5797 as
soon as possible.
Please note: The Log Splitter
is heavy; use care and proper lifting
techniques when move the Log Splitter.
Assembly
1.
To assemble, insert one Jack
Handle (3) into each of the sockets
on the Ram (9). See Figure 1,
above.
SKU 62291
For technical questions, please call 1-888-866-5797.
18" L / 6-1/2" Dia.
13-1/2" L
8-1/16"
Jack
Handles (3)
Figure 1
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section
at the beginning of this manual
before use of this product.
The Splitting Operation - Additional
Safety Instructions:
1.
Hold the bark side of logs when
loading or positioning, never the
ends. Never place your hands or any
body parts between a log and any
part of the Log Splitter.
2.
Never load or unload logs while the
Ram (9) is moving.
3.
Do not pile logs to be split in a place
that will make you reach across the
Log Splitter in order to load them.
4.
Log ends that are not cut square can
slide out while splitting and cause
a safety hazard or cause excessive
force to Log Splitter components.
Use a chainsaw (not included) to
cut logs square on each end before
attempting to split them.
5.
Never attempt to split more than
one log at a time. A piece of log can
Ram (9)
Socket
Page 5
Hide quick links:
Advertisement
Table of Contents
