Instructions For Use; Cleaning And Maintenance - Peg-Perego ride with me board Manual

have not been approved by the
manufacturer.
_ WARNING: NOT TO CLIMB ON
AND OFF STEPS.
_ WARNING: AVOID ROUGH AND
UNEVEN TERRAINS.
_ WARNING: This product is not
suitable for running or skating.
Do not use the footboard as a
skateboard to push the stroller.

INSTRUCTIONS FOR USE

1 Unfasten the basket from the gray buttons
placed on the rear bar.
2 Attach the adapters to the chassis as shown,
until it clicks into place.
WARNING: When fastening the adapters,
make sure they are assembled with the
arrows showing and pointing towards the
central pedal.
3 Remove the screws from the two footboard
brackets (Fig_a). Slip the brackets over the
adapters. If present, the lower part of the
brackets should be placed over the tube that
connects the two brake levers (Fig_b).
WARNING: The bracket pin must be
positioned as shown (Fig_c).
4 Finally, fasten the two brackets by tightening
the two screws removed earlier.
5 Fasten the basket to the gray buttons placed
on the rear bar of the frame.
6 Fasten the wheels to the footboard, inserting
the pin in the special slot under the board.
WARNING: check it has engaged correctly by
pulling the wheels slightly outward.
7 Extend both footboard extensions by pulling
them as shown, until you hear them click
(Fig_a).
Fasten the footboard to the two brackets,
ensuring it clicks into place (Fig_b).
8 To ensure the footboard has engaged
properly, check for the color green (Fig_c).
Footboard fastened correctly (Fig_d).
9 It is possible to set the footboard to "idle"
without removing it from the frame:
_ Lower the basket bar (Fig_a).
_ Press both safety buttons (Fig_b1) and lift
the footboard (Fig_b2).
_ Press both buttons placed under the
footboard and lower it fully (Fig_c).
_ The wheels may be removed (Fig_d) and
stored in special slots (Fig_e).
10 To return to the position of use:
_ Refasten the wheels, if removed.
_ Raise the footboard upwards until it clicks
(Fig_a).
_ Press the two safety buttons and lower the
footboard (Fig_b).
_ To fasten the footboard properly, lift the
frame until it clicks (Fig_c).
_ To ensure the footboard has engaged
properly, check for the color green on the
buttons (Fig_d).
11 The two extensions supplied are used to
lengthen the handlebar and give more room
to the passenger on the footboard:
_ release the handlebar from the frame by
pressing the two inside buttons (Fig_a);
_ slide the two extensions into the handlebar
until they click into place, making sure the
one marked DX is on the right hand side and
the one marked SX is on the left, as shown
(Fig_b);
_ slide the handlebar with extensions into the
frame until it clicks into place (Fig_c).
12 CLOSING the frame with the extended
handlebar: the frame is ONLY freestanding
when the handlebar is positioned as shown
(Fig_a). For stowage in the trunk of the car,
the handlebar should be adjusted as shown
(Fig_b).
13 Permitted configurations:
(a) With the seated facing the world; in this
case, the stroller's backrest must be vertical
to provide greater space to the second
passenger.
(b) With the seated facing mom.
(c) With the car seat facing mom.
CLEANING AND
MAINTENANCE
PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged
and continuous exposure to bright sunlight
may give rise to colour changes of various
different materials; store this product in a dry
place.
CLEANING: periodically clean all plastic parts
with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal
parts dry to prevent rusting; keep moving
parts clean (adjustment mechanisms, locking
mechanisms, wheels, ...) and free of dust and
sand and, if necessary, lubricate with light
machine oil.
PEG-PÉREGO S.p.A.
Peg Perego SpA adopts a quality
management system certified by TÜV Italia
Srl in accordance with the ISO 9001 standard.
Peg Pérego can make changes at any time to
the models described in this publication for
technical or commercial reasons.
PEG-PÉREGO
AFTER-SALES SERVICE
If any parts of the item get lost or damaged,
only use genuine Peg Pérego spare parts.
For any repairs, replacements, information
on the products and sales of genuine spare
parts and accessories, contact the Peg
Pérego Assistance Service and state the serial
number of the product.
tel. 0039/039/60.88.213
fax 0039/039/33.09.992
e-mail assistenza@pegperego.com
website www.pegperego.com
- 8 -