iFootage Shark Slider Nano Instruction Manual page 9

INSTALLATION GUIDE AND FUNCTIONS
Start up
Step 1: Please follow the procedure below.
1
On/Off switch
To turn on, please press and hold the 'ON' switch for 3 seconds
until the boot animation appears.
2
Prior to attaching any equipment, level
the slider and await the 'dynamic
calibration process' to indicate
100%.Avoid any contact with the slider
during this procedure.
Note: Auto calibration takes place after each restart.
APP download:
Scan the QR code or search iFootage Moco directly.
Please visit www.ifootagegear.com
for more information.
3
Install the device and place the camera
lens perpendicular to the track.After the
setting is completed, press "calibrated"
to confirm before normal use.
- 0 7 -