Supermicro AOC-MTG-i2T2S User Manual page 16

SFP+ Ports
Two SFP+ 10Gb adapter ports are located on the add-on card. Connect a DAC
Twin Axial cable or an LC Fiber-Optic cable to the ports to provide Gigabit Ethernet
communication. Refer to the add-on card layout on Page 2-2 for the location of
the SFP+ port.
SFP+ Port LEDs
There are two LEDs located to the sides of the dual SFP+ ports to indicate the
link speed and activity of each port. A 10Gb connection is indicated by a solid or
blinking green LED. A 1Gb connection is indicated by a solid or blinking yellow
LED. See the table at right for more information.
SFP+ Port LEDs
LED Color
Activity Blinking Green
Link Solid Green
Solid Yellow
2-5
Chapter 2: Hardware Components
Link LED
Activity LED
Definition
Activity
10Gb/s Link Speed
1Gb/s Link Speed