Supermicro AOC-ATG-i2T2SM User Manual page 22

C. Installing an AIOM module (An AIOM slot with an AIOM slot cover)
1. Remove the AIOM slot cover by unscrewing the knob and screw that attaches
the bracket to the chassis. Pull the bracket away and set it aside.
2. Position the AIOM module in front of the empty slot and gently push onto the
metal bracket. The AIOM module should slide into the chassis until the card is
securely seated in the connector.
3. Press the blue knob and secure it onto the chassis by turning the knob clockwise.
Note 1: This AIOM module does not support hot plug. Please turn off the
AC power and remove the power cord from the wall socket before installing
or removing an AIOM module.
Note 2: Graphics shown above are for illustration purposes only. Actual
products may vary due to product enhacement.
Pull tab to
engage/disengage
Screw knob to
engage/disengage
3-5
Chapter 3: Installation
AIOM 0.5U slot cover