Usb Media Playback; Aux In; Sleep; Alarm - auna Vertico 10035100 Manual

EN

USB MEDIA PLAYBACK

Insert a USB memory device containing MP3 files into the USB port.
Use the and buttons to select the previous or next track.
Press ⏯ to pause playback. Press the button again to resume playback.
BT
In the BT mode of the device, activate BT on your mobile device. In the BT
menu, set the radio to be visible to other devices. Find the radio "VERTICO"
in the device list of your mobile device. During the pairing process, the
BT symbol on the bottom of the screen flashes. As soon as pairing is
successful, the BT symbol lights up permanently on the screen. Music
playback can now be controlled both from your mobile device and from
the radio. Press the buttons or the remote control to skip a track forward or
backward. Press to start or pause. Press and hold the BT PAIR button on the
remote to deactivate BT.

AUX IN

AUX in mode plays audio from an external source.
Turn the volume low on both the radio and, if adjustable, the audio source
device.
Enter AUX mode, then adjust the volume as required.

SLEEP

To set the sleep timer, select Sleep under Main menu. Or press SLEEP on
the remote control to set. Choose from Sleep OFF, 15, 30, 45 or 60 minutes
and confirm. Once you select a sleep period, the system returns to the now
playing screen.

ALARM

There are two versatile wake-up alarms with snooze facility. Each alarm can
be set to start in a particular mode.
Select Alarms under Main menu to set or change an alarm. Alternately,
press ALARM on the remote control to configure.
After setup all the parameters, select Save to activate. The screen shows
active alarms with an icon at the bottom left.
29