Cleaning And Care Of The Unit; Disposal; What If There Are Problems - Beurer BF 700 Instructions For Use Manual

Replacing batteries
Your scale is equipped with a "low battery indicator". If you operate the scale with flat batteries, "Lo"
will appear on the display and the scale will automatically switch off. In this case, the batteries must be
replaced (3 x 1.5 V AAA).
NOTE:
• When changing batteries, always use batteries of the same type, brand and capacity.
• Do not use rechargeable batteries.
• Use batteries that are free of heavy metals.

11. Cleaning and care of the unit

The unit should be cleaned occasionally.
Clean using a damp cloth, to which you can apply a little detergent if necessary.
IMPORTANT
• Do not use aggressive solvents or cleaning agents!
• Never immerse the unit in water!
• Do not wash the unit in a dishwasher!

12. Disposal

The empty, completely flat batteries must be disposed of through specially designated collection boxes,
recycling points or electronics retailers. You are legally required to dispose of the batteries.
The codes below are printed on batteries containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
For environmental reasons, do not dispose of the device in the household waste at the end of its useful
life. Dispose of the unit at a suitable local collection or recycling point.
Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic
Equipment). If you have any questions, please contact the local authorities responsible for waste
disposal.
Dispose of packaging in an environmentally friendly manner.

13. What if there are problems?

If the scale detects and error when measuring, the following is displayed:
Display
" "
" " runs across the
LCD.
or incorrect weight
is displayed.
or incorrect weight
is displayed.
Incorrect weight is dis-
played.
Cause
Unknown measurement as it
is outside the user assignment
limit or a unique assignment is
not possible.
The fat percentage is outside
the measurable range (less
than 3 % or greater than 65 %).
The maximum load-bearing
capacity of 180 kg was excee-
ded.
No flat, stable surface.
Not standing still.
Scale zero setting is incorrect.
20
PAP
Remedy
Assign unknown measurement in app or
repeat user assignment.
Repeat the measurement barefoot or, if
necessary, moisten the soles of your feet
slightly.
The load must not exceed 180 kg
Place the scale on a flat, stable surface.
Stand as still as possible.
Wait until the scale switches itself off. Acti-
vate scale, wait for "0.0 kg" to appear and
repeat measurement.
20