Hookup; Rear-Panel Connections And Controls; Inputs; Outputs - PRESONUS Eris Sub8 Owner's Manual

2

Hookup

2.1

Rear-Panel Connections and Controls

2 Hookup
2.1 Rear-Panel Connections and Controls

Inputs

2.1.1
2.1.2

Outputs

2.1.3

Power

Line-level Inputs. The Eris Sub8 provides a choice of two input pairs: a pair of
balanced ¼" TRS inputs and one pair of RCA unbalanced inputs. When both
connections are in use, the RCA inputs will sum into the TRS connections.
Power User Tip: Connect both the left and right inputs if you are connecting your
full-range monitors to the Eris Sub8's outputs, or if you're running your Eris Sub8
independently from a stereo source (such as the PreSonus Monitor Station). This will
ensure that your Eris Sub8 receives the low-frequency content from both the left and right
sides of a stereo audio signal. If your audio source provides a mono or LFE output, you
only need to connect one input—either L or R.
2 1
[+] Ground
3
[-]
XLR
Input Gain. Sets the level of the input signal before it is amplified.
Outputs. The Eris Sub8 provides two pairs of outputs: a pair of balanced ¼"
TRS outputs and a pair of RCA unbalanced outputs. The full-range signal
connected to the stereo inputs on the Sub8 is passed through to these outputs.
Use these outputs to connect your main left and right studio monitors.
If the High Pass Filter switch is engaged, frequencies below 80 Hz are not sent from
these outputs.
IEC Power Connection. Your Eris Sub8 accepts a standard IEC power cord.
Warning: Do not remove the center grounding prong or use a separate
ground-lift adapter, as this could result in electric shock.
Power Switch. This is the On/Off switch. The power status is indicated by the
illuminated logo on the front of the cabinet.
Sleeve: Ring:
Ground [-]
TRS
Eris Sub8
™
Owner's Manual
Tip:
[+]
3