Specifications - Rockford Fosgate RFX Series Installation Reference Sheet

RFX9100
RFX9100RDS
RFX9100
SCAN SCAN RPT RPT RDM RDM ST LOC EON EON REG REG
VOLUME DISC-IN DISC-IN
Features
General
• ISO-DIN Mountable – 178mm x 50mm (trim ring removed)
• Fold Down Detachable Faceplate
• Multi-Color LCD Display
• CD Changer Control
• Internal Amplifier – 4x25 Watts RMS / 4x40 Watts PEAK
Preamp
• Low Source Impedance – Drive multible amps without
signal loss
• Source Tone Memory – Enables separate Bass and Treble
memory for Tuner/CD Player/Changer modes
• 4-Audio Outputs – Front/Rear preamp outputs

Specifications

FM Tuner
Frequency Response ................................... 30Hz-12kHz
Usable Sensitivity................................... 10dB(S/N 30dB)
IF Rejection............................................................. 90dB
Image Rejection ...................................................... 50dB
Signal-to-Noise Ratio .............................................. 60dB
Channel Separation .................................. ≥ 25dB@1kHz
CD Player
Usable Discs..................................................... 5" and 3"
Frequency Response........................ 20Hz-20kHz (±3dB)
Signal-to-Noise Ratio ............................................ >90dB
Channel Separation................................................. 86dB
Dynamic Range .................................................... 100dB
AM Tuner
Sensitivity ......................... 20dBf max @ 10dB Sensitivity
-6dB Bandwidth ........................... 5kHz min-12kHz max
AF/FM ST/CD Player/Changer Control/IR Remote/Audio Switcher
RDS/AF/FM ST/CD Player/Changer Control/IR Remote/Audio Switcher
PWR
MODE
®
CDX CDX CH CH
TP TP TP AF AF AF PTY PTY
MUTE
PAUSE
MP3 MP3
ROOT ROOT DIR DIR SONG SONG
1
V12 V12 PUNCH R.SEA PUNCH R.SEAT
SCAN
4
DISC
7
ENTER
RFX9100RDS
TRACK
PUNCH
R.SEAT
VOL SEEK
DISP
SEL BAND AF/ TP
2 3
PTY
RPT RDM DISC-ACC
5 6
AS
+ TRACK-ACC
8 9 0
+
DIR ROOT
Tuner
• MIR – (Multipath Interference Rejection) Improves audio performance
when radio reception is poor
• 30 Station Presets – 10 AM/20 FM Presets
• Auto Store – Auto programming of all 30 presets
• World Wide Tuner – American/Europe/Australia
• RDS Tuning (RFX9100RDS only) – RDS (Radio Data System) tuners
can automatically tune in radio stations according to the style of
music the station broadcasts. RDS also enables the receiver to display
text messages (usually call letters) and can break in with traffic alerts
or emergency broadcasts when listening to a CD
Compact Disc
• 5.0 Hologram Laser – One piece laser accurately tracks CD
• Dual 1-bit D/A Converters w/8x Oversampling
• Digital Servo Control w/Auto Focus – Adjusts to CD manufacturing
tolerances for accurate tracking
General
Operating Voltage............................................ +10.8 to +16V DC
Continuous Power Output ........................................... 4x25 Watts
Dynamic Power Output............................................... 4x40 Watts
Pre-Out Voltage (vol. max) .............................................. 2.0 Vrms
Preamp Output Impedance ................................................. 100 Ω
Equalization .................................................Bass: ± 10dB @ 60Hz
Overall Dimensions
(with trim ring) ................................(58mm x 188mm x 183.7mm)
Nosepiece Dimensions
(without trim ring) .......................(46.5mm x 171.5mm x 20.2mm)
Weight
.......................................................... 3.85 lbs. (1.74kg)
IR Remote
Dimensions....................................... 3-3/8"H x 2-1/8"W x 9/32"D
Specifications subject to change without notice
®
CDX CDX CH CH
SCAN SCAN RPT RPT RDM RDM ST LOC EON EON REG REG TP TP TP AF AF AF PTY PTY
MP3 MP3
ROOT ROOT DIR DIR SONG SONG
VOLUME DISC-IN DISC-IN V12 V12 PUNCH R.SEA PUNCH R.SEAT
Treble: ± 8dB @ 15kHz
...... 2-9/32"H x 7-13/32"W x 7-1/4"D
..1-27/32"H x 6-3/4"W x 13/16"D
(85.6mm x 54mm x 7mm)
Specification
Reference
Sheet
TRACK
PWR PUNCH
R.SEAT
VOL SEEK
MODE DISP
MUTE
SEL BAND AF/ TP
PAUSE
1 2 3
PTY
SCAN RPT RDM DISC-ACC
4 5 6
AS
+ TRACK-ACC
DISC
7 8 9 0
+
ENTER DIR ROOT