Amana ADB1000AW Installation Instructions Manual page 15

To change door panel color
(For models so equipped.)
NOTE: If your model has a plastic door color panel, both sides of
the panel are the same color.
1. Handle panels gently. Insert finger under one end of retainer
and pull toward you in a peeling action. Set retainer aside.
2. Lift door panel(s) at outer edges. Use one hand to bow
bottom of panel(s). Remove panel(s). Do not remove spacer.
3. Insert one side of door panel(s), with desired color facing out,
into one side of door frame.
4. Bow door panel(s) and insert other side of door panel(s) into
door frame.
5. Push in on door panel(s) near the top and slide panel(s) and
spacer up inside bottom of control console, allowing panel(s)
to rest on channel at bottom of door.
6. Snap one end of retainer into channel as shown. Push inward
while sliding thumb along full length of retainer.
15