Comelit Maxi Manager Operating Manual page 9

______________________________________________________________
BURGLAR ALARM
√ Alarm in progress
1.
2 5/01/2020
2.
Burglar zone alarm
Al l ar me z on e f u r t o
3.
Area : Can t in a
Area: Cellar
Zon a: Por t a in g resso
4.
Zone: Entrance door
5.
I D: 3
6.
Scroll through events
1.
Date and time of selected event
2.
View images in real time
3.
View recorded video
4.
View recorded images
5.
Stop alarms
6.
Reset telephone calls
7.
Reset alarm
8.
Deactivate alarms
9.
Event details
10.
„ Press the icon to view real-time images from the
camera connected to the alarm zone.
„ Press the icon to view the video recorded when the
Disins.
alarm was triggered.
„ Press the icon to view the images captured in pre-
alarm* and alarm mode.
„ Video / Images loading Disins.
Disins.
„ Video / Images not available
• To view images and videos, at least one camera must
be connected and associated with an area of the alarm
system.
• The functions can be configured and activated via Safe
Manager.
• *The pre-alarm images will only be captured if the "pre-
alarm" function has been assigned to the camera. The
number of images captured during the pre-alarm phase
will depend on the pre-alarm time; with a pre-alarm time
of zero, images will only be captured in alarm mode.
DESCRIPTION OF ALARM CONTROLS
„ Press to stop the selected alarm (the system remains
armed).
Disins.
„ Press to clear the emergency telephone calls log.
1.
Disins.
„ Press to reset the alarms memory.
Disins.
„ Press to disarm the alarm system.
17:49:41
Disins.
Deactiv.
7. 8. 9.
Disins.
Disins.
2.
The Alarms memory menu keeps track of the alarm in
progress.
Paragraph
Alarm-Settings-Event log
______________________________________________________________
RESET ALARMS
The alarm system can be reset in any of the following 3 ways:
Press the Reset alarms icon on the alarm screen.
1.
» Reset completed
25/ 01/2 020
10.
Burglar zone alarm
A ll a r me zo ne fur t o
A re a : Ca nti na
Area: Cellar
Zo na : Po r t a ingre s s o
Zone: Entrance door
I D : 3
Access Quick commands from the main screen (if set previously)
2.
or from the Alarm Menu and press the Reset alarm icon.
» Reset completed
Disarmed
Front garden
Back garden
Day zone
Night zone
3. Perform an ACTIVATION (even partial) of the areas in alarm.
______________________________________________________________
ALARM MENU
3. 4.
Each time an ALARM function parameter is changed, it will be relayed
to the control panel.
„ Press the icon to access the menu.
The procedure requires the user password for the alarm
control panel!
OFF
17:4 9:41
Disins.
Deactiv.
Activation control Quick commands
Garage 1
Garage 2
Full
activation
Basement
room
Cellar
CONTENTS
5.
9