Advertisement
Available languages
Available languages
Step 3: Mount the drawbar
•
Connect the tie rods (4,5) using the connector (10) and the M6 x35(19)
screw.
•
Connect the tie rod to the frame using the tie rod holder (12) and the
M6x50mm(18) screws.
•
Connect the foot (11) to the tie rod holder (12) by inserting the M6x47mm
(20) screw through the centre hole of the tie rod holder to the upper hole
of the foot and fix it.
•
Tilt the foot upwards and secure it with the safety pin (13) as shown.
1
4
Step 4: Attach the coupling
Secure the saddle connector (15) to the saddle using the washer (17). Now use
the M8x50mm screw premounted on the saddle connector (15) to connect the
saddle connector and the coupling (14) together.
2
5
3
6
EN
13
Advertisement
