1. Safety Instructions
1.1 Instructions for use
Please pay attention to the following basic safety precautions before using the product:
* Read the user manual carefully and follow the instructions in the user annual when using the product.
* Save the user manual for future reference.
* If you need to transfer the product to a third party, please attach the user manual along with the product.
* Any operation not in conformity to the instructions in the user manual may result in serious personal injury
or damage to the product itself.
1.2 Safety precautions
Warning
This product can only use the adapter, batteries and charging dock
that are provided with this product. Failure to do so may result in
damage to the product, electrical shock, or fire caused by high
voltage.
Do not use this product if the host machine and accessories of this product
are found to be damaged. Contact our after-sales service department.
Except for the service technicians designated or authorized by our company,
no one should disassemble, repair or modify this product.
Unplug the product before maintenance.
Do not touch the power plug or the product when your hands are wet, as
this may result in electrical shock.
If the power cord is damaged, it must be replaced by the manufacturer, its
service department or a similar professional to avoid danger.
To prevent the product from falling accidentally, do not use this product in a
suspended place without a protective fence, which may result in personal
keep cleaning the tall sensors regularly
injury.
The user shall not replace the batteries privately.
original batteries sold by Milagrow are to be used
Prevent clothing or any part of your body (hair, fingers, etc.) from getting
caught in the brush or wheel of the vacuum cleaner. Failure to do so may
result in personal injury.
Do not place the product near fire or flammable/explosive/corrosive
materials.
If the user manual is missing, please contact your local dealer or call the
after-sales service department to obtain an electronic user manual.
- 02 -
iMap 10.0
from load sources only
Need help?
Do you have a question about the iMap10.0 and is the answer not in the manual?