Information About The Appliance; Information For The Maintenance Technician; Description And Intended Use - Saeco Royal OTC SUP060 Operation And Maintenance

Table of Contents

Advertisement

2

INFORMATION ABOUT THE APPLIANCE

2.1
Information for the
Maintenance Technician
The appliance must be
installed
in
sheltered and dry place
and on a table suitable to
bear its weight.
To ensure its correct operation and reliability over time,
comply with the following recommendations:
• ambient temperature: from +2°C to +32°C;
• maximum humidity allowed: 80% (non-condensed).
For special installations, not covered by this manual, please
contact the dealer or the local importer. If this is not
possible, please contact the Manufacturer.
The technical service is available for any explanation or
information regarding the correct operation of the
machine and to satisfy any request for spare parts supply
or technical assistance.
The Maintenance Technician must carefully read and
observe the safety warnings contained in this manual to
ensure that installation, start-up, use and maintenance
operations are performed in complete safety.
This manual is an essential part supplied with the machine
and should always be available for reference before any
operation on the machine.
2.2

Description and Intended Use

This machine is automatically used to brew:
• coffee and espresso coffee using instantly ground coffee
beans;
• hot beverages using hot water dispensed via the
dispensing spout.
• milk-based beverages using the Cappuccinatore supplied.
The elegant machine housing has been designed for use in
small offices, businesses and institutions.
Using the machine for any other purpose is considered
dangerous and as a misuse.
a
well-lit,
• any use other than the intended use and/or employing
• any operation on the machine in breach of the instructions
• any tampering with parts and/or safety devices not
• machine installation in an outdoor environment.
In such cases the customer will be charged with the
machine repair cost.
Misuse voids all forms of
warranty,
releasing
Manufacturer
responsibility for damage
to
property
personal injury.
The following are also
considered misuse:
methods other than those described in this manual;
provided in this manual;
previously authorised by the Manufacturer and performed
by unauthorised personnel;
English
the
from
any
and/or
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents