Disposal And Recycling; Storage And Transport; Faults - EINHELL AGILLO Original Operating Instructions

8. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.

9. Storage and transport

Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its
original packaging.
The equipment has an integrated wall holder (Fig.
25/Item 35) to enable it to be hung on the wall.
•
Always hold the equipment with one hand
on the handle and the other hand on the
additional handle. Do not carry the equipment
by its motor housing.
•
Secure the equipment against slipping if you
transport it in a vehicle.
•
As far as possible, use the original packaging
for transporting the equipment.
•
Use a transport guard for metal blades during
transport and storage.

10. Faults

The equipment does not work:
Check that the battery is charged and whether
the charging unit is working. If the equipment will
not work in spite of the voltage supply being OK,
please send it to the customer service address
below.
Anl_Agillo_SPK7_USA.indb 21 Anl_Agillo_SPK7_USA.indb 21
EN
The reprinting or reproduction by any other
means, in whole or in part, of documentation and
papers accompanying the products is strictly
subject to the express consent of iSC GmbH.
Subject to technical changes
- 21 -
05.08.2019 10:37:31 05.08.2019 10:37:31