BRP Sea-Doo 295 100 457 Instructions Manual page 7

ssi2009-001-007
20. Locate side and position of lateral arms (LH &
RH) on the support.
RH & LH parts names are indicated on the
NOTE:
backside.
ssi2009-001-008
SEE LH/RH INDICATION ON BACKSIDES
For GTI and GTS models, invert RH and LH
NOTE:
side for installation.
ssi2011-030-003_a
SKI PYLON INSTALLATION ON GTI AND GTS
1. RH arm installed on LH side
2. LH arm installed on RH side
21. Assemble M6 x 100 bolt through the ski pylon
support with M6 flat washers and nut.
Instruction Sheet P/N 487 800 755
ssi2009-001-009_a
TYPICAL
1. Ski pylon support [P2]
2. RH arm [P3]
3. LH arm [P4]
4. M6 x 100 bolt [P5]
5. M6 flat washer on both sides [P7]
6. M6 nut [P6]
22. Tighten M6 x 100 bolt to 8 N•m ± 1 N•m
(71 lbf•in ± 9 lbf•in).
Up to 2009
23. Using a square, trace gauge line for drilling.
ssi2009-001-010_a
1. RH arm [P3]
A. Distance from surface to drilling gauge line = 35 mm (1-3/8 in)
B. Surface reference plane
C. Gauge line trace
2010 and up GTX and RXT platforms
24. Using a square, trace a line for drilling.
INSTRUCTIONS
7 / 11