Warning Label - BRP Sea-Doo 295 100 457 Instructions Manual

INSTRUCTIONS
ssi2009-001-014
CHECKING PYLON HANDLE MOVEMENT
Pylon cylinder may be unlocked and removed
from its support by pressing the support collar.
ssi2009-001-015_a
A. Pushing down collar to unlock cylinder
15. Reinstall coolant reservoir into its brackets.
16. Reinstall seat.
17. Apply BRP decal to its location.
ssi2009-001-016
10 / 11
Completely retract ski pylon when not used.
Do not hold rear grab handle while retract-
ing ski pylon. Make sure it is fully extended
and locked before use. Spotter must always
keep hands on ski pylon handle while pulling
a skier or a wakeboarder.

WARNING LABEL

This product comes with the following, already ap-
posed, english warning label containing important
safety information. Install the french label if nec-
essary.
219903137
ENGLISH LABEL (P/N 219 903 137)
219903138
FRENCH LABEL (P/N 219 903 138)
The label should be considered permanent part of
this product. If the label comes off or becomes
hard to read, please contact an authorized dealer
for replacement.
Any person who intends to use this product
should read and understand the information con-
tained on the warning label before doing so.
Instruction Sheet P/N 487 800 755
WARNING