Panasonic CS- U12WKY Series Operating Instructions Manual page 6

AUTO - For your convenience
Unit run with optimised settings.
You can change the temperature according to
your comfort.
COOL - To enjoy cool air
To reduce power consumption during COOL mode,
use curtains to screen off sunlight and outdoor heat.
DRY - To dehumidify the environment
Unit operates at auto fan speed to give a gentle
cooling operation.
FAN - To operate Air-Con in "Fan Only" mode
Only indoor unit fan operates as per remote settings.
Outdoor is OFF, so no cooling acheived.
Provides air circulation in the room.
* Indoor unit temp. display will show set temp. for
AUTO,COOL & DRY mode and room temp. for FAN
mode.
This operation provides you with a comfortable
environment while sleeping by gradually increase
the set temperature 1 °C after "3" hours operation.
The unit is turned off after "8" hours.
"SL" will be displayed on Remote
POWERFUL
• This operation is to achieve faster cooling.
•
This operation stops automatically after 1 hour.
• The unit displays set
temperature.
10
SLEEP POWER
POWERFUL TIMER
Press to turn ON/OFF
the hidden display.
• Press the button to turn on.
If AUTO is set, the louver swings up/down
automatically.
CLEAN
To clean dust on evap. coil of
the Air-Conditioner Unit
'CL' will be displayed on the remote controller.
While 'CL' is diplayed, all other functions of the
remote controller will be disabled, except for
ON/OFF button.
Press CLEAN button again to cancel.
• To cancel ON or OFF timer, press
LOCK
• If timer is cancelled manually or due to power
Press'LOCK' for 5 seconds to lock/unlock
failure, you can restore the timer again by
remote keypad.
pressing
When keypad is lock, remote display show Lo
• The nearest timer setting will be displayed and
when any button is pressed.
will activate in sequence.
• When ON Timer is set, the unit may start
earlier (up to "15" minutes) before the actual
set time in order to achieve the desired
temperature on time.
POWERFUL, SLEEP, TIMER etc.
function will not resume after power failure.
TIMER
ON OFF CANCEL
Example:
Select ON or OFF
OFF at 14:00
timer
• Press the OFF
button. OFF
Set the time
• Press OFF button again to
increase timer time in step
of "10" minutes.
OFF OFF OFF OFF OFF
Confirm
• Wait for "5" second to set timer.
.
CANCEL
or then wait for "5" sec.
ON OFF
52 30
11
( 6 / 8 )
A C I 2 P R 0 9 2 0 1