Related Manuals for Ingersoll-Rand 130A1M
Summary of Contents for Ingersoll-Rand 130A1M
- Page 1 16605651 Edition 2 May 2014 Air Percussive Rammer Models 130A1M and 241A1M Maintenance Information Save These Instructions...
-
Page 2: Product Safety Information
Grease Gun Lubrication. Lubrication Each time the Model 130A1M or 241A1M Sand Rammer is For Model 241 only, remove the Oil Chamber Plug (26) and fill the disassembled for maintenance, repair or replacement of parts, oil chamber with 9 cc of Ingersoll Rand No. 10 Oil. - Page 3 Disassembly of the Barrel Remove the Valve Box Cap (12), the Valve (13), and the Valve Box (15). For both Models If required, remove the four Valve Box Dowels (14) from the Valve Clamp the shaft of the Piston (23, 43) in leather-covered or Box Cap.
-
Page 4: Related Documentation
Place the throttle assembly into the Valve Block, throttle valve Cap (10) onto the Throttle Valve. stem first. Secure the Throttle Valve Face Cap with the Throttle Valve Face Follow the throttle assembly with the Throttle Valve Spring (3) and Retaining Screw (11). - Page 5 Notes:...
- Page 6 Notes:...
- Page 7 Notes:...
- Page 8 ingersollrandproducts.com © 2014 Ingersoll Rand...
Need help?
Do you have a question about the 130A1M and is the answer not in the manual?
Questions and answers