Recognizing Safety Warnings; General Safety Practices; Training; Clothing - TURFCO Torrent Operators Manual & Parts Lists

SAFETY
LOOK FOR THE SAFETY HAZARD WARNING SYMBOL
It is used in conjunction with the words DANGER, WARNING, and CAUTION.
DANGER
"DANGER" identifies immediate hazards which will result in serious injury or death.
"WARNING" identifies potential hazards which could result in serious injury or death.
"CAUTION" identifies hazardous situations which may result in minor injury and/or could result in
damage or destruction of equipment.
Safety on the job should always be a top priority.
Training and experience are important factors in the safe
operation of equipment. Please consider the following
information and realize that safe operation is a matter
of using common sense as it relates to the machine, its
maintenance, the operator, the training, and the operating
conditions. These are general safety instructions that
apply to most turf maintenance equipment.
This list includes many, but not all, general
safety instructions as they relate to turf
equipment. Common sense must always be
used to determine the safest way to operate a
machine under specific conditions.

TRAINING:

● Always read the manual before operating a machine
for the first time.
● Always read the warning decals before operating a
machine for the first time.
● Always check the location and use of each control
before operating a machine for the first time.
● Practice operating the machine in a safe area with no
obstructions until becoming familiar with the controls.
If you have questions, ask your supervisor or call the
factory.

CLOTHING:

● Cloths should be snug fit. Loose fitting clothing is
hazardous because it may get caught in the mechanism
during service or operation.
● Remove jewelry before operation. Again, jewelry may
get caught in the mechanism.
● Wear shoes that will protect your feet. In most cases,
sneakers do not protect and do not provide the
protection of leather shoes or boots. Steel toed safety
shoes should be considered for many situations.
● Hard Hat: The use of a hard hat should be considered
4
Recognizing Safety Warnings Used In Manual
The symbol is used to alert the operator of safety hazards.

General Safety Practices

WARNING
when using equipment on a golf course. The danger
of being hit by a golf ball should be a major concern as
well as protection while operating under trees .
● Eye Protection: Safety glasses and/or face shields
should be considered when operating, as well as
working in close proximity to high speed rotary
equipment. Watch for rotary mowers, edgers, brush
and string trimmers. Rotary mowers can throw debris
at speed up to 200 MPH.
● Hearing: If the noise level of the equipment is too loud,
consider the use of ear protection.
● Do not use stereo headsets during operation. This is a
distraction that may lead to an accident. Headsets also
make it difficult to hear other people and equipment
while operating in the work area.
● Respirators: When operating in dusty, windy
conditions, wear a respirator. This is also an important
consideration if operating equipment while spraying
chemicals and fertilizers.
● Gloves: Use gloves when handling sharp or hazardous
objects.
THE OPERATOR:
● The operator should never use a machine while under
the influence of alcohol or drugs. The operator should
be aware of the hazards of working in the sun and
should take proper precautions to avoid heat stress
and dehydration. Use sun screen products when
necessary.
● The operator should never attempt to ride a machine
that is not designed for that propose. Do not allow
others to ride a machine that is not designed for
passengers.
● Care should always be taken when mounting and
dismounting a riding machine. Prevent injuries and
falls by making sure the operator does not slip. Unless
it is an emergency, do not jump off a machine. Injury
may result when an operator's foot slips trying to jump
from a machine.
CAUTION
85650RevA