Installation Results - Mellanox Technologies ConnectX-4 Lx User Manual

1. Open a CMD console-> Click Start-> Task Manager File-> Run new task-> and enter CMD.
2. Install the driver. Run:
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe /S /v/qn
3. [Optional] Manually configure your setup to contain the logs option:
_All_Arch.exe /S /v/qn /v"/l*vx [Log-
4. [Optional] if you wish to control whether to install ND provider or not (i.e., MT_NDPROPERTY default value
is True ).
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe
5. [Optional] If you do not wish to upgrade your firmware version (i.e., MT_SKIPFWUPGRD default value is
False ).
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe

4.2.3.3 Installation Results

Upon installation completion, you can verify the successful addition of the network card(s) through the Device
Manager. The inf files can be located at:
%ProgramFiles%\Mellanox\MLNX_WinOF2\Drivers\
45
File]"" v:shapes="_x0000_s1026">
/vMT_NDPROPERTY=1
/vMT_SKIPFWUPGRD=1
Mellanox Technologies