Mlnxofedinstall Return Codes; Uninstalling Mlnx_Ofed; Installing Mlnx_Ofed Using Yum; Setting Up Mlnx_Ofed Yum Repository - Mellanox Technologies ConnectX-4 Lx User Manual

1. Add the following lines to the "/etc/modprobe.d/mlnx.conf" file.
blacklist mlx4_core
blacklist mlx4_en
blacklist mlx5_core
blacklist mlx5_ib
2. Set "ONBOOT=no" in the "/etc/infiniband/openib.conf" file.
3. If the modules exist in the initramfs file, they can automatically be loaded by the kernel.
To prevent this behavior, update the initramfs using the operating systems' standard tools.
Note: The process of updating the initramfs will add the blacklists from step 1, and will prevent the kernel from
loading the modules automatically.

4.1.3.7 mlnxofedinstall Return Codes

The table below lists the mlnxofedinstall script return codes and their meanings.
Return Code
0
1
2
22
28
171
172
173

4.1.3.8 Uninstalling MLNX_OFED

Use the script /usr/sbin/ofed_uninstall.sh to uninstall the Mellanox OFED package. The script is part of the ofed-scripts
RPM.

4.1.4 Installing MLNX_OFED Using YUM

This type of installation is applicable to RedHat/OL, Fedora, XenServer Operating Systems.

4.1.4.1 Setting up MLNX_OFED YUM Repository

1. Log into the installation machine as root.
2. Mount the ISO image on your machine and copy its content to a shared location in your network.
30
The installation ended successfully
The installation failed
No firmware was found for the adapter device
Invalid parameter
Not enough free space
Not applicable to this system configuration. This can occur when the
required hardware is not present on the system.
Prerequisites are not met. For example, missing the required software
installed or the hardware is not configured correctly.
Failed to start the mst driver
Meaning
Mellanox Technologies