Check The Level Indicator - Graco SlimFit3 LX Instruction Manual

3. Place Car Seat Rear-Facing in Back Seat of
the Vehicle
Place rear-facing in vehicle seat. The base should
sit as flat as possible on the vehicle seat.
4. Make Sure Base is a minimum of 80% on
Vehicle Seat.

5. Check the Level Indicator

Vehicle MUST be on level ground. Ball must be
completely in the blue area. Readjust the recline
if needed.
If needed, rolled towels may be placed under the
car seat at the vehicle seat crease, until the base
is completely in the blue area.
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 39 NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 39
39
9/18/20 11:49 AM 9/18/20 11:49 AM