User Instructions
Leg Lifter Range
Single Handle
Double Handle
F19571
L33194
General Safety Warning
Please ensure these instructions are fully read and
Flexible Handle
implemented. Failure to do so may result in injury.
Retain these instructions in a safe place for future
reference.
1.0 Intended Use
The leg lifter can offer greater mobility and
Reinforced Foot Loop
independence to the user providing support for lifting
stiff or immobile legs. Particularly useful when getting
in and out of bed, a wheelchair or car but also for
repositioning legs when sitting.
Figure 1 - F19571 Single Loop
Leg Lifter
2.0 Safety
Do not leave product on floor, it could become a trip
hazard.
Take care when using the lifter not to get tangled. Do
not loop the handle over the wrist.
3.0 Unpacking
Remove packaging and check product carefully. If
you suspect any faults, do not use and contact your
supplier immediately.
4.0 Instructions for Use
Ensure the foot loop is open wide, mould it to roughly
the correct shape and size of your foot.
Hold the handle (F19571) or handles (L33194) and
use them to help you hook the foot loop over your foot.
Once your foot is comfortably inside the loop, use the
handles to lift your leg up and guide it to the new
position.
Once your leg is in the desired position remove from
your foot, repeat the process if necessary for your
Figure 2 - Using the Single Loop Leg Lifter
other leg.
Need help?
Do you have a question about the F19571 and is the answer not in the manual?
Questions and answers