Dover PSG Mouvex MX12 Safety, Operation And Maintenance Instructions
  1. Manuals
  2. Brands
  3. Dover Manuals
  4. Air Compressor
  5. PSG Mouvex MX12
  6. Safety, operation and maintenance instructions

Dover PSG Mouvex MX12 Safety, Operation And Maintenance Instructions

Screw compressor
Hide thumbs Also See for PSG Mouvex MX12:
Table of Contents

Advertisement

Quick Links

SCREW COMPRESSORS
This Instructions only contains bare shaft machine information.
It is imperative to have in complement the accessories instructions, also the parts list before
installing the equipment.
MX12 screw compressors are covered 24 months by warranty within the limits mentioned in our General Sales Conditions. The use of the
BSC3 oil carries our warranty from 24 to 36 months. In case of a use other than that mentioned in the Instructions manual, and without
preliminary agreement of MOUVEX, warranty will be canceled.
Warranty extension with oil BSC3 : See § W
Z.I. La Plaine des Isles - F 89000 AUXERRE - FRANCE
Tel. : +33 (0)3.86.49.86.30 - Fax : +33 (0)3.86.49.87.17
contact.mouvex@psgdover.com - www.mouvex.com
MX12
WARRANTY :
.
ARRANTY
INSTRUCTIONS 1401-AL00 e
Section
1401
Effective
October 2020 (2)
Replaces
October 2020
Original instructions
INSTALLATION
OPERATION
MAINTENANCE
SAFETY
STORAGE
Your distributor :

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSG Mouvex MX12 and is the answer not in the manual?

Questions and answers

Related Manuals for Dover PSG Mouvex MX12

Summary of Contents for Dover PSG Mouvex MX12

  • Page 1 INSTRUCTIONS 1401-AL00 e Section 1401 Effective October 2020 (2) Replaces October 2020 Original instructions MX12 SCREW COMPRESSORS INSTALLATION OPERATION MAINTENANCE SAFETY STORAGE This Instructions only contains bare shaft machine information. It is imperative to have in complement the accessories instructions, also the parts list before installing the equipment.

  • Page 2: Table Of Contents

    MOUVEX TRUCK SCREW COMPRESSOR SAFETY, OPERATION AND MAINTENANCE INSTRUCTIONS MODEL : MX12 Page TABLE OF CONTENTS Definition of safety symbols 1. OVERALL DIMENSIONS ......4 2.
  • Page 3 SAFETY DATA WARNING SAFETY CHECK LIST 1. Before operating the compressor, ensure the vessel to which the compressor is connected is certified to withstand the pressure. IT IS IMPERATIVE TO APPLY THE 2. Verify adequately sized relief valves have been fitted to protect the TRUCK PARKING BRAKE AND TO BLOCK THE WHEELS BEFORE ANY vessel.

  • Page 4: Overall Dimensions

    1. OVERALL DIMENSIONS NT 1401-AL00 10 20 (2) MX12 e 4/18...
  • Page 5 1. OVERALL DIMENSIONS (continued) NT 1401-AL00 10 20 (2) MX12 e 5/18...
  • Page 6 1. OVERALL DIMENSIONS (continued) Oil cooler N.4 ø9x15 ø9 ø9x15 ø1/2"BSP' (Thermostat) ø1/2"BSP' Overall dimensions and technical characteristic are not binding 154.5 121.5 31.5 79.5 Ø 1” BSP 12V si besoin (as an option). Demander à l avance (ask in advance) Fourni ongueur ourni (...

  • Page 7: General Data

    2. GENERAL DATA 2.1 Principle of operation 2.2 Technical characteristics The operating characteristics are given in the indicative operation conditions : ambient temperature and air inlet temperature 20°C, atmospheric pressure : 1013 mbars. Speed allowed at the compressor drive shaft : See § PERATING RANGES ECOMMENDED DRIVE CONDITIONS Rotation direction:...

  • Page 8: Operating Ranges

    2. GENERAL DATA (continued) 2.3 Operating ranges 2.3.2 CONDITIONS AT DISCHARGE The operating ranges specified in the § T The MX12 compressor must be protected by a valve that ECHNICAL CHA protects the compressor against accidental over-pressure. give the conditions that must be respected RACTERISTICS on mounting and packaging of the MX12.

  • Page 9: Installation

    3. INSTALLATION 3.2 Fixations During the assembly, check that no foreign body penetrates into the compressor. The piping inlet and outlet must be per- fectly clean. Any foreign body risks to damage seriously the compressor. All the fixation points availables must be used. CAUTION The presence of foreign bodies in the compressor inlet channel is susceptible of leading to serious property...

  • Page 10: Connections

    3. INSTALLATION (continued) 3.3.3 Inlet It uses the same parts than MH6. There are 2 positions possible: left or right. The length of this U is too high on purpose (to cover any brand for the beginning of this project). It needs to be drill depending the brand and cut at the right length too fit the chassis.

  • Page 11: At Suction

    3. INSTALLATION (continued) 3.4 At suction 3.5 Discharge The suction side of the compressor must be fitted with a 3.5.1 Silencer air filter. This filter must be installed horizontally, rain pro- Dampens noise in pipes. It shall be positioned as close tection cap upwards.
  • Page 12 3. INSTALLATION (continued) Universal joint angle 3.6.1 Speed range 0,017 1° The compressor may be driven : 0,035 2° • Directly by a PTO shaft 0,052 3° VERY GOOD • By belt /pulley arrangement 0,070 4° _________ • By hydraulic transmission √...

  • Page 13: Use Of Compressor

    4. USE OF COMPRESSOR 4.2 Filling of lubricant The operator should remain nearby the equipment throughout the use to ensure the proper functioning of the system. CAUTION It is imperative to hold the hose in order to avoid whipping Our compressors are delivered without oil. The use during pressurization.

  • Page 14: Operation

    4. U S E O F C O M P R E S S O R (continued) 4.3 Operation 4.4.1 Start-up procedure for manual gear box • Start the engine and run with standard speed. • The compressor must be started with the discharge valves open.

  • Page 15: Maintenance

    5. MAINTENANCE 5.1 Maintenance schedules 5.2 Compressor oil change procedure Oil gauge : See § L UBRICANT RECOMMENDATIONS After every cleaning of the truck Replace the oil filter at each oil change. Always run the compressor for 15 minutes to remove any water that inadvertently gets into the piping.

  • Page 16: Troubleshooting

    6. TROUBLESHOOTING CAUTION : OBSERVE ALL SAFETY WARNINGS CONTAINED IN THIS MANUAL. NT 1401-AL00 10 20 (2) MX12 e 16/18...

  • Page 17: Warranty

    7. WARRANTY 7.1 Warranty claims 7.2 24-months warranty extension with BSC3 The following part are considered as wear part : • Inlet filter cartridge The 24-months warranty extension with BSC3 oil option • Compressor oil increases the warranty for the screw compressor to 60 months : No failure connected with wear part damage will be accepted under warranty conditions.

  • Page 18: Certificate Of Conformity

    10. CERTIFICATE OF CONFORMITY NT 1401-AL00 10 20 (2) MX12 e 18/18...

Table of Contents