Installing Weplaysmart By Hatch - hatch WePlaySmart Instructions Manual

Installing WePlaySmart by Hatch

NOTE: Installation time allotted is one hour.
1. Once the table is securely propped against a sturdy surface or wall, attach each of the four legs to
the underside of the table by screwing them in one at a time. Ensure the leg with the Hatch sticker is
placed nearest the power button and cord (the power leg).
IMPORTANT: PLEASE BE CAREFUL WHEN YOU SCREW IN THE FOUR LEGS. DO NOT FORCE THE LEGS ON.
THE LEGS WILL EASILY SCREW ON IF IT IS PROPERLY ALIGNED. IF NOT ALIGNED PROPERLY, REMOVE
LEG(S) AND REALIGN. IF YOU DO NOT DO THIS, YOU MAY STRIP THE SCREWS.
a. If you have purchased the add-on Mobility Package, please see instructions for installing the
Mobility (Casters) package.
Last Revised Date: 6/26/13
V 1.1
7 | P a g e