Installation And Connections; Accessories - Alpine RUX-C701 Owner's Manual

Installation and Connections

IMPORTANT
Please record the serial number of your unit in
the space provided below and keep it as a
permanent record. The serial number plate is
located on the rear of the control unit.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
To prevent external noise from entering the
audio system.
• Locate the unit and route the leads at least 10 cm away
from the car harness.
• Keep the battery power leads as far away from other
leads as possible.
• Connect the ground lead securely to a bare metal spot
(remove any paint, dirt or grease if necessary) of the
car chassis.
• If you add an optional noise suppressor, connect it as
far away from the unit as possible.
Your Alpine dealer carries various noise suppressors.
Contact them for further information.
• Your Alpine dealer knows best about noise prevention
measures so consult your dealer for further
information.
4
-EN

Accessories

Microphone
Display cable
Pan head screw Flat head screw
(M3 x 5) (M5 x 8)
x 2
Self-tapping screw
(M2.6 x 8)
x 4
Velcro fastener
for mounting
control unit
Flush mount
x 4
x 2
Mounting unit
1 set