System Setup - Kenwood DMX9720XS Instruction Manual

Setup
5
Touch [Learning completed].
NOTE
• When changing the function already learned,
press and hold the button you want to change
in step 2 and then touch to select the changed
function from the function list.
• Confirm the contents of the settable function on
the function list. You cannot edit the function list.
• To initialize the contents, touch [Learning
initialisation] of [Steering Remote
Controller] in User Interface setting menu. After
you touch [Initialise], a confirmation message
appears. Follow the message and complete the
operation.
58

System Setup

You can setup system parameters.
1
Press the [HOME]/[ ] button.
2
Touch [ ].
3
Touch [SETUP].
h SETUP Menu screen appears. h
4
Touch [System].
h System setting menu appears.
h
5
Set each parameter as follows.
■
[DEMO]
Select the demonstration mode. Default is
"ON".
[Software Information]
■
Confirm the software version of this unit.
(P.59)
[Open Source Licenses]
■
Display the open source licenses.
■ [Initialise]
Touch [Initialise] and then touch [Yes] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
[OEM SETUP]
■
Confirm the information about or change the
settings for using the iDatalink (commercially
available).
[Language select]
■
Select a language.
[Time Format]
■
■ [Clock]
[Time Zone]
■
[Clock Adjust]
■
You can set the date and time. See
Calendar/clock settings (P.10).