Kenwood DMX9720XS Instruction Manual page 84

Connection/Installation
Ñ
Installing the main unit
NOTE
• Determine the slider position before installing the
main unit. (P.79) The slider position cannot be
changed after installing to the vehicle.
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).
1
Remove parts that interfere with
installing such as a panel on the vehicle.
2
Install the car bracket to the main unit.
Car bracket
4 or 5
3
Connect the wiring harness wires and
peripheral equipment.
4
Install the main unit to the vehicle.
5
Reinstall the removed parts such as a
panel on the vehicle.
Main unit
84
6
7
Main unit
8
Panel on the
vehicle
Install the display unit (accessory 8) to
the main unit.
NOTE
• If the display unit hits a panel on the vehicle,
adjust the display height by referring to
Adjusting the display height (P.80).
Fix the display unit with six hexagon head
screws (accessory -).
-
Attach the protective cover (accessory =)
to coupling part, and then fix it with two
binding head screws (accessory ~).
~
Main unit
8
=