Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. PRODUCT DEFINITIONS EH1712 – 45W Tubular Heater EH1714 – 80W Tubular Heater EH1716 – 135W Tubular Heater EH1718 – 180W Tubular Heater...
INSTALLATION It is very important that the tubular heater is mounted horizontally to a wall at low- level. Do not mount below a socket outlet. Any shelving above the heater must be at a distance of no less than 200mm. Air should be allowed to circulate freely around the heater in order to prevent overheating.
Page 4
Using a dry 1" (25 mm) paint-brush, remove any dust from the tube. If the mains lead is damaged, it must be replaced by the manufacturer or an authorised service centre. If the mains plug needs to be replaced, proceed as follows: ...
When replacing an existing appliance with a similar new appliance your retailer may take the old appliance for disposal. SERVICE WARRANTY Prem-i-Air guarantees the product free from defects in materials and workmanship for a period of one year. Should this unit be operated under conditions other than those recommended, at voltages other than the voltage indicated on the unit, or any attempts made to service or modify the unit, then the warranty will be rendered void.