The Gateway is the IP address of the necessary router for your LAN. How do I know what the right IP, Netmask, and Gateway Settings are for my Allworx unit? – Good Question! – Since Allworx typically acts as both a router and a host, there are actually two sets of settings (WAN and LAN) for the Allworx unit with the gateway address always being the same for both sets of settings.
Allworx also has the ability to host your domain to the World Wide Web for you. This is particularly useful if Allworx’s public web server features are being used and you don’t want to pay a provider to host the domain name for you.
Internet connection of sufficient bandwidth that is typically available 24/7 at a static IP address. If your Allworx WAN port will not be connected to the Internet all the time or you are using dynamic IP addressing, you probably want to consider a different option described below.
• LAN Support – In this role client PC’s on the LAN point to Allworx and use Allworx as the primary DNS name resolver to convert domain names into IP addresses. This mode of operation has two important benefits.
For the sake of reference here, we call that mode the WAN VoIP case. The more typical Allworx case for a single site without any internal routers only has to consider the much less complicated LAN only VoIP case.
Need help?
Do you have a question about the 10x and is the answer not in the manual?
Questions and answers