Getting The Kit Online; Creating The Lora Cloud™ Portal Account; Claiming A Device - Semtech LoRa Edge Tracker Reference Design Evaluation Kit User Manual

Table of Contents

Getting the Kit Online

There are a few steps involved in getting your LR1110 Trackers online for the first time. The process of

setting up the devices will be illustrative of the overall setup and system configuration. By following the

steps outlined below, you should be up-and-running in less than 30 minutes.

Creating the LoRa Cloud™ Portal Account

Before a LR1110 Tracker device can be claimed however, you first must have an account on the LoRa

Cloud™. To setup your account, navigate in a browser to https://www.loracloud.com. On that page you will

see a "Get Started" button.

You will be presented with an option to create an account. Use your email address and create a password.

You will be sent a confirmation email for the account. Click on the confirmation link in the email and you

will be taken to the login page. After logging into your new account, you will need to accept the Terms &

Conditions of Usage and your account activation will be complete.

To claim a device, first you start off on the LoRa Cloud™ Device Join portal at

https://www.loracloud.com/portal/join_service. From there, select the "Devices" link on the left pane and

you will be presented with a Join Server page. Under the "Devices" header, you will be presented with two

options to "Claim Individual Device" or "Bulk Upload (CSV)". As was previously discussed, you can get the

required information for each LR1110 Tracker device directly from the modem API. If you select the "Claim

Individual Device" you will be presented with a form that looks like this:

Table of Contents