Understanding The Go Nfc Logger - Emerson GO NFC Logger User Manual

Understanding the GO NFC Logger

1. Part Number
2. Temperature Alert Parameters
3. Plastic Pouch
1. Product Part Number – A unique number that customers use to reorder additional loggers with the
same specification profile.
2. Temperature Alert Parameters – Signifies the logger's upper and lower temperature parameters.
Alerts will flash if these ranges are exceeded according to the logger's programming.
3. Plastic Pouch – each logger is encased in a waterproof
pouch.
4. LED Indicators – Give a quick visual indication if a product remained within temperature
parameters. "Ok" LED will flash to indicate the logger is on. Single LED flashes indicate the logger is
actively recording time and temperature. Two flashes in quick succession means that the logger's
memory is full.
5. Press+Hold Button – To start push the button a minimum of 2 seconds to activate the loggers.
Once logger is started, LEDs will flash in a sequence to indicate successful activation. Loggers should
be activated when the product is ready for shipment.
6. QR Code – Scan the QR code of the logger to gain access to the Emerson GO NFC Reader App.
7. In Use Life – Use life indicates how long the logger will log time and temperature.
8. Logger Serial Number and Barcode Representation – Each logger has a unique serial number
which differentiates it from other Emerson loggers. When information is downloaded from the
logger, it will be identified by this serial number.
Note that each logger is sealed in a waterproof plastic pouch.
DO NOT REMOVE Logger FROM PLASTIC POUCH.
4
4. LED Indicator
IP67 compliant IEC 60259
8. Serial Number &
Barcode Representation
7. In-Use Life
6. QR Code for app
download
5. Press + Hold Button
to start
Standard, plastic