Huawei SmartACBox-12/1-JP User Manual page 59

SmartACBox 12-In 1-Out Smart AC Combiner Box
User Manual
LCD
Issue 03 (2018-05-15) Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
3. Enter the User name and Password by
pressing or , and then press
NOTE

Because of the limited permission, select the
User name as Advanced User or Special User.
The initial password for Advanced User and
Special User is 000001.

After passing the permission validation, the
system keeps the authentication information for
30 seconds. If you exit the screen and log in
again within 30 seconds, no authentication is
required.
4. Choose Device Mgmt. and press

Perform step 5 to enable the
SmartLogger1000 to automatically search
for devices.
 Perform step 6 to add devices to the
SmartLogger1000.
5. Choose Auto. Search and press
Before performing the automatic search,
ensure that all the devices can normally
communicate with the SmartLogger1000.
NOTE

After you add, delete, or replace a device, or
change the RS485 address, search for devices
again.
 To add a device, search for the device on the
SmartLogger1000 manually or restart the
SmartLogger1000, and then search for the
device again on the network management
system (NMS).
 After the SmartLogger1000 restarts, the system
automatically searches for devices.
6 Operation
.
.
.
53