Idap Software Version; Change Setpoints And Deadbands - Data Aire idap Installation, Operation & Maintenance Manual

F. idap Software Version
To find the idap card software and firmware version, simply click "Configuration" tab from the menu
on the left, then click on the "Utilities" tab from the menu across the top of the page.
Consult with factory if software or firmware upgrade are needed.
G. Change Setpoints and Deadbands
To modify the system temperature, humidity setpoint and deadband, simply click on the "Change"
button next to the Relative humidity setpoint and deadband on the system status page. The fol-
lowing window will appear, enter new setpoint or deadband then click "Submit."
19