Set Date And Time; Changing User Name And Password - Data Aire idap Installation, Operation & Maintenance Manual

D. Set Date and Time
The idap card does not have a built-in time clock, its date and time are synchronized with the dap4
controller. The default idap card has been programmed to synchronize with the dap4 controller time
clock every minute. Do not try to change the time clock synchronizer settings. Changing time clock
synchronization settings will cause time clock and event logging errors. To change the date and
time, go to dap4 menu C - Clock and Scheduler. To view the clock synchronizer setting, click on
"Data and Graphs" the click on "Clock" tab. The following screen will appear:
E. Changing User Name and Password
To change user name and password, click on "Password" in the "Configuration" page then click on
"Change User Name and Password." The following screen will appear:
Click on "admin", the following screen will display:
13