Fault Message At The End Of A Programme - Miele WER 865 WPS Excellence Operating Instructions Manual

Fault message at the end of a programme

Problem

Check dosage

Hygiene info: Select
"Maintenance" and
run the "Clean ma-
chine" programme.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
Cause and remedy
Excessive foam has built up during washing.
 Check the amount of detergent dispensed.
 With automatic detergent dispensing, check the
dosage amount set.
 Observe the instructions on the detergent pack-
aging and the degree of soiling of the laundry.
 If necessary, reduce the dispensing quantity by in-
crements of 10 %.
A wash programme using a temperature above 60 °C
has not been run for a long time.
 In order to prevent bacteria and unpleasant odours
building up in the washing machine, run the Main-
tenance wash programme using Miele machine
cleaner or a universal powder detergent.
Problem solving guide
73