Before using for the first time
5. Commissioning TwinDos
Set up "TwinDos"?
Skip
Touch the
Continue
set TwinDos up straight away.
Tip: To postpone setup until later:
Touch the
Skip
sensor control. The fol-
lowing message will then appear in the
display:
It is possible to set up later in "Settings" /
"TwinDos".
Confirm with the
Settings for compartment
The procedure for Miele UltraPhase 1
and Miele UltraPhase 2 is described be-
low. The procedure for other detergents
is similar.
Agent for comp.
No agent
Miele
UltraPhase 1
Touch the
Miele UltraPhase 1
control.
22
sensor control to
sensor control.
OK
Universal
Delicates
detergent
detergent
Colour
Delicates/
detergent
Woollens
sensor
The following message will then appear
in the display:
Please enter the dosing recommendation
of your detergent for a wash with normal
soiling. Take note of your water hardness
level.
The dispensing quantity for
UltraPhase 1 is preset for (hard-
ness level II).
Continue
Dosage for comp.
Confirm the preset value with the
sensor control, or change the
OK
value.
Hardness level I
Hardness level II
11:02
Hardness level III
The following appears in the display:
Insert container
OK
60
59
58
ml
57
56
UltraPhase 1
46 ml
58 ml
70 ml
11:02
OK