Table of Contents
Advertisement
Available languages
Available languages
appliance by yourself in order
to avoid a hazard.
Ensure that the voltage indicated on the rating
label matches the mains voltage before
plugging in the appliance.
Connect the appliance to a base with an earth
socket withstanding a minimum of 10 amperes.
The appliance's plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
Do not force the power cord. Never use the
power cord to lift up, carry or unplug the
appliance.
Do not clip or crease the power cord.
Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
Do not touch the plug with wet hands.
Do not use the appliance if the cable or plug is
damaged.
Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
Use and care:
Leave the appliance standing for at least 2
hours in its normal working position after the
last time it transported or moved, before
switching on.
Do not remove the support feet of the
appliance.
Do not move the appliance while in use.
Do not use the appliance if it is tipped up and
do not turn it over.
Do not turn the appliance over while it is in use
or connected to the mains.
This appliance is for household use only, not
professional, industrial use.
Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
Do not expose the appliance to extreme
temperatures.
Keep the appliance in a dry, dust-free place,
out of direct sunlight.
Make sure that dust, dirt or other foreign
objects do not block the fan grill on the
appliance.
Keep the appliance in good condition. Check
that the moving parts are not misaligned or
jammed and make sure there are no broken
parts or anomalies that may prevent the
appliance from operating correctly.
If for any reason the appliance is on fire,
immediately disconnect it from the mains,
ensure there is no presence of air currents that
could stoke the fire and put out the flames with
the help of a lid, or other nonflammable items,
NEVER using water.
Service:
Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
Any misuse or failure to follow the instructions
for use renders the guarantee and the
manufacturer's liability null and void.
Description
A Cabinet
B Shelves
C Cold generator fan
D Ventilation holes
E Leveling leg
F Control panel
G Interior light
H Gasket
I Glass door
Installation
This wine cooler is designed to be free
standing installation only, and should not be
recessed or built-in (Fully recessed).
Place your Wine cooler on a surface that is
strong enough to support it when it is fully
loaded.
Allow 5 inches of space between the back and
sides of the Wine cooler, which allows the
proper air circulation to cool the heat sink.
Locate the Wine cooler away from direct
sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the
acrylic coating and heat sources may increase
electrical consumption. Extreme cold ambient
temperatures may also cause the unit not to
perform properly.
This Wine cooler uses thermoelectric
refrigeration technology (no compressor) and
is not designed for storage in hot areas like
garages, warehouses or outdoors since it is
designed to operate at a maximum of 30
degrees below the ambient temperature.
Avoid locating the unit in moist areas.
Plug the Wine cooler into an exclusive,
properly installed-grounded wall outlet. Do not
under any circumstances cut or remove the
third (ground) prong from the power cord. Any
questions concerning power and/or grounding
Advertisement
Table of Contents
