Allied Telesis AT-2711FX Datasheet

Datasheet | Network Interface Cards
AT -2711FX
Fast Ethernet Fiber Network Interface Card with PCI-Express
AT -2711FX
PCIe x 1 (channel) Fast Ethernet fiber
interface card
High Reliability
The AT-2711FX Fast Ethernet fiber interface
card comes with a comprehesive Windows
utility that performs detailed tests, diagnostics,
and analysis.
Advanced Manageability
The priority queuing offered by AT-2711FX can
help users set-up the network based on their
own needs.The comprehensive diagnostics and
configuration software suite provides system
administrators and engineers with a profound
tool to analyze the interface card and check
specific data.
Allied Telesis
More Bandwidth with
PCI-Express Interface
AT-2711FX x1 PCI-Express (PCIe) design gives
you the maximum possible bandwidth and bus
efficiency, other benefits are: capability and low
power consumption.
Easy Migration Path for AT -2701FX
Users
For current customers who are using Allied
Telesis' 100Mbps fiber cards (AT-2701FX), and
want to upgrade their systems to PCI-Express,
AT-2711FX is the ultimate solution.These
customers can continue using their existing
100Mbps fiber network without adding any
more new equipment.
For new customers equipped with PCI-Express
systems, AT-2711FX gives them the ability to
easily build or connect to the Fast Ethernet
fiber networks.
Key Features
Management Software
• VLAN support
Advance Properties
• PCIe (PCI-Express) x1 interface
• IEEE 802.1x flow control
• 72KB packet buffer
• IEEE 802.1p-based traffic prioritization
• TCP checksum RX/TX supported
• PXE (2.1) remote boot support
• Wake-on-LAN (WoL)
• Jumbo packet support
• Available with SC, ST or MT-RJ multi-mode
fiber connections
• Low-profile and standard height brackets
included
• Microsoft certified drivers
• RoHS compliant
• IPv6
• Compliant with Trade Agreement Act
• SNMP
• Windows Vista
www.alliedtelesis.com