Layout And Items Supplied; Proper Use - EINHELL TC-JS 85 Original Operating Instructions

•
Keep your workplace tidy.
•
Make sure the power switch is off before in-
serting the plug in the socket.
•
Wear suitable clothing. Never wear loose-
fitting clothes or jewelry. Use a hair-net on
long hair.
•
For your own safety, use only the
manufacturer's accessories and attachments.
•
Use only sharp saw blades that are in perfect
condition. Replace bent and cracked saw bla-
des immediately.
•
After switching off the saw, do not press
against the side of the blade to bring it to a
halt.
•
Always cut at a steady rate of progress. This
will prevent accidents and prolong the life of
your saw and the blade.
•
Use only a damp cloth to clean your saw. Do
not use any aggressive agents for cleaning
purposes.
•
Check your saw to ensure that it is in good
working order. If the saw fails to work properly,
have it checked. Leave all maintenance and
inspection work strictly to a qualified electrici-
an or ISC GmbH.
•
Check the fastening screws
Check the fastening screws regularly and
make sure that they are all securely tightened.
Tighten any loose screws immediately, other-
wise there is the risk of serious injuries.
•
Hold the equipment by the insulated
handles when carrying out work during
which the plug-in tool could strike con-
cealed power cables or its own mains
lead. Contact with a live cable can also make
the metal parts of the equipment live and will
cause an electric shock.
Do not lose these safety instructions

2. Layout and items supplied

2.1 Layout (Fig. 1-3)
1. Speed controller
2. Locking button
3. On/Off switch
4. Power cable
5. Adapter for dust extraction system
6. Switch for dust-blower function
7. Adjustable soleplate
8. Selector switch for pendulum action
9. Dial scale for soleplate
10. Guide roller
Anl_SA_TC_JS_85_SPK8.indb 19 Anl_SA_TC_JS_85_SPK8.indb 19
GB
11. Parallel stop
12. Saw blade
13. Locking screws for parallel stop
14. Blade holder
15. Safety guard
16. Locking lever for soleplate
17. Splinter guard
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Jigsaw
•
Parallel stop
•
Saw blade for wood
•
Original operating instructions

3. Proper use

The jigsaw is designed for sawing wood, metals,
non-ferrous metals and plastics using the approp-
riate saw blade.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
- 19 -
29.11.2016 09:11:30 29.11.2016 09:11:30