2. Layout and items supplied Danger! When using the equipment, a few safety pre- cautions must be observed to avoid injuries and 2.1 Layout (Fig. 1,2,3) damage. Please read the complete operating 1. Handle instructions and safety regulations with due care. 2.
3. Proper use Sawing sheet metal Vibration emission value a = 8.932 m/s K uncertainty = 1.5 m/s The jigsaw is designed for sawing wood, metals, non-ferrous metals and plastics using the approp- The stated vibration emission levels and stated riate saw blade.
Page 15
• 5.1 Safety guard (Fig. 2/Item 12) However, the soleplate (5) is also easily set to • The safety guard (12) protects the user from another angle. To do so, move the soleplate accidentally touching the saw blade (10) but (5) to the rear, set the desired angle and re- still gives you an unobstructed view of the fasten the screw securing the soleplate (13).
6. Operation If the battery pack fails to charge, check for the following: • voltage at the power socket 6.1 On/Off switch (Fig. 10/Item 3) • whether there is good contact at the charging contacts of the charging unit To switch on: Press the locking button (2) and the On/Off...
• Keep all safety devices, air vents and the with the express consent of the Einhell Germany motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean...
10. Charger indicator Indicator status Explanations and actions Red LED Green LED Off Flashing Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger Off Charging The charger is charging the battery pack in quick charge mode. The char- ging times are shown directly on the charger.
* Not necessarily included in the scope of delivery! Please register the product warranty of Einhell brand products. Customers must scan the QR Code of the Serial number in the product or QR code on the box, to additional 6 months warranty for the whole battery and battery charger (Note: Promotion is change without prior notice.
Need help?
Do you have a question about the TC-JS 18 Li and is the answer not in the manual?
Questions and answers