Additional Stereo Control Options; Connecting To A Garmin Watch; Connecting To An Arx70 Remote Control; Fusion-Link Wireless Remote Control App - Garmin FUSION MS-RA210 Owner's Manual

Additional Stereo Control Options

Connecting to a Garmin
For a list of a compatible Garmin watches, go to www.fusionentertainment.com.
For more information about the watch, see the watch manual at www.garmin.com/manuals.
1 Following the instructions in the watch manual, install the Fusion-Link Lite
onto the watch.
2 On the stereo, select the BT source.
3 Select > BT > CONNECTIONS > DISCOVERABLE.
The stereo remains discoverable for two minutes.
4 Bring the watch within 3 m (10 ft.) of the stereo.
NOTE: Stay 10 m (33 ft.) away from other ANT
5 Open the Fusion-Link Lite app on the watch.
The first time you open the app on the watch, the watch automatically pairs with and connects to the stereo.
If you need to pair to another stereo, in the Fusion-Link Lite app, select Settings > Pair new.
6 Control the audio playback using the Fusion-Link Lite app on the watch.
After the devices are paired, they connect automatically when they are turned on, within range, and the app is
open on the watch.

Connecting to an ARX70 Remote Control

1 On the stereo, select the BT source.
2 Select > BT > CONNECTIONS > DISCOVERABLE.
3 Bring the ARX70 remote control within 10 m (33 ft.) of the stereo.
NOTE: Stay 10 m (33 ft.) away from other ANT devices while pairing.
4 On the ARX70 remote control, press and hold
The remote control searches for the stereo. When the remote control pairs successfully, the status LED
turns on green briefly and then turns off.
If the remote control cannot find the stereo, the status LED turns on red briefly and then turns off.

Fusion-Link Wireless Remote Control App

You can use the Fusion-Link remote control app on your compatible Apple or Android device to adjust the
stereo volume, change the source, control playback, select and manage radio presets, and adjust some stereo
settings.You can use the app to set up and configure DSP profiles on the stereo.
The app communicates with the stereo using a wireless connection to the mobile device. You must connect
your compatible device to the stereo using Bluetooth technology to use the app.
You can connect an Apple device to the stereo using a USB cable to update the stereo software.
For information about the Fusion-Link remote control app for compatible Apple or Android devices, go to the
SM
Apple App Store or the Google Play
Additional Stereo Control Options
Watch
®
® devices while pairing.
until the status LED starts alternating green and red.
store.
™
app from the Connect IQ
™
store
™
21