Table of Contents
Advertisement
When you connect a compatible Digital Audio Broadcasting (DAB) module and antenna, such as the MS-
DAB100A to the RA210 stereo, you can tune in to and play DAB stations.
DAB broadcasts are not available in all regions. When the stereo is not set to a compatible region, the DAB
source is not available.
Setting the Tuner Region
You must select the region you are in to receive DAB stations properly.
1 Select
> SETTINGS.
2 Select TUNER REGION.
3 Select the region you are in.
Scanning for DAB Stations
Before you can scan for DAB stations, you must connect a compatible DAB module and antenna (not included)
to the stereo. Because DAB signals are broadcast in select countries only, you must also set the tuner region to
a location where DAB signals are broadcast.
1 Select the DAB source.
2 Select
to scan for available DAB stations.
When scanning is complete, the first available station in the first ensemble found begins playing.
NOTE: After the first scan is complete, you can select
scan is complete, the system starts playing the first station in the ensemble you were listening to when you
started the re-scan.
Changing DAB Stations
1 Select the DAB source.
2 If necessary, select
3 Select
or
to change the station.
When you reach the end of the current ensemble, the stereo automatically changes to the first available
station in the next ensemble.
TIP: You can hold
Selecting a DAB Station from a List
1 Select the DAB source.
2 If necessary, select
3 Select
> DAB > BROWSE > STATIONS.
4 Select a station from the list.
Selecting a DAB Station from a Category
1 Select the DAB source.
2 If necessary, select
3 Select
> DAB > BROWSE > CATEGORIES.
4 Select a category from the list.
5 Select a station from the list.
16
DAB Playback
to scan for local DAB stations.
or
to change the ensemble.
to scan for local DAB stations.
to scan for local DAB stations.
again to re-scan for DAB stations. When the re-
DAB Playback
Advertisement
Table of Contents
Troubleshooting
