Olympus IPLEX NX IV9000N Instructions Manual
  1. Manuals
  2. Brands
  3. Olympus Manuals
  4. Industrial Equipment
  5. IPLEX NX IV9000N
  6. Instructions manual

Olympus IPLEX NX IV9000N Instructions Manual

Industrial endoscope
Hide thumbs
Table of Contents

Advertisement

Quick Links

INSTRUCTIONS
IPLEX NX
INDUSTRIAL ENDOSCOPE
IV9000N
IV9435N
IV9450N
IV9635N
IV9635X1N
IV9650N
IV9675N
Industrial Endoscope
MM2671 08
Issued in February, 2020

Advertisement

Table of Contents
loading

Related Manuals for Olympus IPLEX NX IV9000N

Summary of Contents for Olympus IPLEX NX IV9000N

  • Page 1 INSTRUCTIONS IPLEX NX INDUSTRIAL ENDOSCOPE IV9000N IV9435N IV9450N IV9635N IV9635X1N IV9650N IV9675N Industrial Endoscope MM2671 08 Issued in February, 2020...
  • Page 2 Manufactured by Shinjuku Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0914, Japan Distributed by...

  • Page 3: Table Of Contents

    Contents Introduction ..........................1 Intended use..........................1 Instruction manual ....................... 1 Product configuration ...................... 1 Safety precautions ......................2 Rating plate/caution plate ................10 1 Unpacking ........................13 1-1 Unpacking ........................13 Storing the optical adapter case ................13 Options ..............................14 2 Nomenclature ......................15 2-1 Nomenclature ......................
  • Page 4 3-6 Removing the scope unit ................32 3-7 Connecting the remote control unit to the main unit .........................33 3-8 Connecting the SDHC card/USB flash drive ....34 3-9 Attaching/removing the shoulder strap ........35 3-10 Attaching the hook assembly ............36 3-11 Replacing the hook..................37 3-12 Replacing the safety cap ................38 3-13 Using the handle holder ................38 3-14 Using the channel port grip and the belt clamp ..39...
  • Page 5 Recording the movie ......................56 Appending the movie ......................57 4-9 Playing back the image ................58 Playing back an image in a full-screen view (View screen) .. 59 Viewing the thumbnail screen and selecting the playback image................................59 Sound attached to the still image................60 Playing back and pausing the movie ...............
  • Page 6 6-4 Observing the measurement area ..........80 Observing the measurement area on the live screen ....80 Measuring the distance to the measurement area by spot ranging ...............................81 6-5 Measurement ......................83 Measurement ........................... 83 Measurement screen ......................84 Measurement method types ..................86 Specification of measurement points ...............88 <3D OPTION>...
  • Page 7 Cleaning the hook assembly ..................102 Cleaning the LCD monitor ....................102 Cleaning of other units ......................102 9-4 Storage precautions ..................103 Storing the instrument in the carrying case ...........103 Storing the hook assembly ..................104 10 Specifications ....................105 10-1 Operating environment ................105 10-2 Other specifications ..................106 Other specifications ......................106 External application standard ...................109 Software license information ..................109...

  • Page 9: Introduction

    If you have any questions about any information in this instruction manual, please contact Olympus. The symbols used in the texts of this manual have following meanings: [ ] indicates the words on the user interface of the product displayed in English.

  • Page 10: Safety Precautions

    Only personnel who are authorized by Olympus are allowed to repair the instrument. Olympus is not liable for any accidents or instrument damage that occurs as a result of repairs attempted by personnel who are not authorized by Olympus.
  • Page 11 · Use the stereo optical adapter and the scope unit in combination specified by Olympus. If you use them in combination that is not specified by Olympus, the unexpected accidents that may deteriorate the performance may result. · Note the following precautions when the illumination is turned ON.
  • Page 12 · If the optical adapter cannot be attached or removed because the nut does not rotate, stop using it. Contact Olympus. · If you sense any abnormality while performing the angulation operation, do not attempt to force the angulation operation.
  • Page 13 · When tilting the handle, be careful not to pinch your hands or any objects. · Use SDHC card and microSDHC card recommended by Olympus to record images. This instrument comes with an SDHC card.
  • Page 14 NOTE · Do not allow any liquids other than water, saltwater, machine oil or diesel oil to be attached to the insertion tube. Otherwise, the insertion tube may be damaged. · Note the following precautions when handling the battery cover and the connector cover.
  • Page 15 · Keep your face away from the ends of the hook assembly. Your eyes may be poked by the ends of the hook assembly. · Do not insert any tool that is not specified by Olympus into the channel. The tool may not be pulled out or the loose parts of the tool may fall off.
  • Page 16 Safety precautions - Battery precautions - If you experience any problems when using this instrument with batteries, contact Olympus. Comply strictly with the precautions described below when handling the battery. If the batteries are handled improperly, the battery fluid leakage, excessive heat generation, smoke, battery burst, electric shock and/or burns may result.
  • Page 17 If any foreign object enters the main unit, remove the battery and disconnect the AC adapter, and immediately contact Olympus. · Do not remove the battery immediately if the instrument was used continuously for a long time.

  • Page 18: Rating Plate/Caution Plate

    It may cause burns. Indicates that the laser beam is applied. Take special care in handling. If labels are missing or if their contents are illegible, contact Olympus.  Rating, Caution 1 Base unit  Caution 4 ...
  • Page 19 IPLEX NX Scope unit (optional)  Caution  Conformity label  Label without description  Model name, serial number...
  • Page 20 Stereo scope unit (optional)  Caution  Conformity label  Stereo measurement label  Model name, serial number Remote control unit (optional)  Caution, model name, serial number...

  • Page 21: Unpacking

    IPLEX NX Unpacking 1-1 Unpacking When unpacking, make sure that all items listed below are included. If anything is missing or damaged, contact Olympus. Name Quantity Base unit* Image recording media (SDHC card) AC adapter Scope stopper LCD holding bracket...

  • Page 22: Options

    IV9635X1N, IV9635X1N-MD or IV9635X1N-MDS can be used with the software version 1.40A or later of this product. If you are using the version earlier than 1.40A, download the latest software from the following URL and update the software in use. https://www.olympus-ims.com/en/service-and-support/downloads/ Refer to “System chart” (page 114) for information on other options.

  • Page 23: Nomenclature

    IPLEX NX Nomenclature 2-1 Nomenclature Name Base unit Handle The base unit is Main unit LCD unit handle fixing lever composed of the LCD monitor main unit and the Connector cover LCD unit. Battery cover LCD unit [ROTATE] button [ANGLE SEL/CENTER] button [ANGLE/LOCK] joystick [RECORD] button [FREEZE] button...
  • Page 24 Scope unit IV9{{{N, IV9{{{N-MD, IV9{{{N-MDS Name Distal end Angulation section Insertion tube Scope strain relief IV9635X1N, IV9635X1N-MD, IV9635X1N-MDS Name Distal end Angulation section Insertion tube Channel port Universal cord Handle holder Safety cap Scope strain relief Chuck screw Lock ring Protrusions (two positions each on front and back sides)
  • Page 25 IPLEX NX Remote control unit Name Name [ZOOM] lever [MEAS/ENTER] joystick [BRIGHT] lever [LIVE] button [ANGLE/LOCK] joystick [CENT] button [VIEW] button Hanger for attaching LCD unit [MENU] button [FREEZE] button [THUMBNAIL] button [RECORD] button [SPOT RANGING] button Insertion tube grip (Stereo measurement only)

  • Page 26: Distal End/Optical Adapter Nomenclature

    2-2 Distal end/optical adapter nomenclature 4-mm type 6-mm type 6.2-mm type { Distal end { Distal end { Distal end 11 11 { Optical adapter, { Optical adapter, { Optical adapter, stereo optical adapter stereo optical adapter stereo optical adapter Side-view Forward-view Side-view...

  • Page 27: Lcd Monitor Nomenclature

    IPLEX NX 2-3 LCD monitor nomenclature Live screen Icon/Indicator Name Folder name Optical adapter name Distal end temperature indicator Warming-up icon Brightness level Zoom level Date/Time WiDER icon Title Media icon (SD or USB) Number of recordable images Battery indicator Freeze icon Recording movie icon Recording sound icon...
  • Page 28 Thumbnail screen Icon/Indicator Name Folder name Optical adapter name Distal end temperature indicator Warming-up icon Brightness level Zoom level Date/Time WiDER icon View screen Title Media icon (SD or USB) { When playing back the still image Number of recordable images Battery indicator Manual icon...
  • Page 29 IPLEX NX Touch panel Name Touch panel buttons display button The buttons on the touch panel are [ZOOM] button displayed common in the live screen, thumbnail screen and view screen. [BRT] button When touch panel buttons are hidden Touch panel buttons hide button [MENU] button [LIVE] button [VIEW] button...

  • Page 30: Pre-Operation Preparation And Inspection

    Pre-operation preparation and inspection Be sure to perform the preparation and inspection described in this chapter before using the instrument. At the first sign of any abnormality, immediately stop using the instrument and perform the required actions as described in “8 Troubleshooting” (page 96). Inspections are not only required before use but also should be conducted periodically.

  • Page 31: Placing The Instrument

    IPLEX NX 3-2 Placing the instrument Removing components from the carrying case Hold the handle to take out from the carrying case. Handle Placing the main unit on a flat surface Horizontal orientation Vertical orientation The main unit can be placed either in horizontal orientation or in vertical orientation. Place it on the stable location.

  • Page 32: Adjusting The Height And Direction Of The Lcd Unit

    Adjusting the height and direction of the LCD unit Press the cover of the handle and pull up the LCD monitor to adjust the height of the LCD monitor. Rotate the LCD monitor around the attaching handle to adjust the direction. Placing the LCD unit The LCD unit can be removed from the main unit and placed separately by using the long LCD cable (optional).
  • Page 33 IPLEX NX  Attaching the long LCD cable Cover Cover Waterproof rubber Clamping screw Clamping screw Loosen the clamping screws of the LCD connector covers of the main unit and the LCD unit, and open the cover. Remove the LCD cable from the main unit and the LCD unit. Connect the long LCD cable to the main unit and the LCD unit.
  • Page 34  Placing the LCD unit only LCD unit Remove the LCD unit from the main unit, attach the LCD unit to the handle of the carrying case and secure it. NOTE · When adjusting the angle of the handle of the LCD unit, hold the handle of the carrying case to support the LCD unit firmly.

  • Page 35: Preparing The Power Supply

    IPLEX NX 3-3 Preparing the power supply Using the battery  Checking the remaining battery level (on battery) The remaining battery power can be checked on the [POWER INDICATOR] of the battery. (Note the remaining battery power shown on the LCD monitor is different from that shown on the [POWER INDICATOR].) While the [CHECK] button is being pressed, LED (in 3 levels) that shows the charging status turns ON.

  • Page 36: Using The Ac Adapter

    · The battery is a consumable item. · The battery cannot be charged by this instrument. For information on charging the battery, refer to the instruction manual provided with the battery charger. { Removing the battery Remove the battery by raising the tab at the battery insertion slot.

  • Page 37: Taking Out The Insertion Tube

    IPLEX NX 3-4 Taking out the insertion tube Drum Remove the drum from the drum case of the main unit, and take out the insertion tube from the drum. NOTE · When taking out the insertion tube from the drum, hold the drum and take out the insertion tube.

  • Page 38: Attaching And Removing The Optical Adapter

    3-5 Attaching and removing the optical adapter NOTE · Be sure to attach the O-ring to the distal end of the insertion tube before using the optical adapter. Water getting into the area where the insertion tube and the optical adapter join may cause malfunction or damage.
  • Page 39 IPLEX NX Optical adapter Rotate the nut of the optical adapter clockwise until the con- necting screw thread passes over the first screw thread. Optical adapter After passing the first screw thread, rotate the entire main body main body of the optical adapter clockwise while pushing gently until the optical adapter main body fits into the positioning groove of the insertion tube and stops rotating anymore.

  • Page 40: Removing The Scope Unit

    3-6 Removing the scope unit Latch Rotate the latch at the top of the main unit counterclockwise to unlock it. Remove the scope unit.  Attaching the scope unit Connector Attaching tab Attaching bar Check that the end surface of the connector is not dirty. If it is dirty, wipe it completely with the cotton swab provided with the lens cleaning kit.

  • Page 41: Connecting The Remote Control Unit To The Main Unit

    IPLEX NX 3-7 Connecting the remote control unit to the main unit Remote control unit connector cap Remove the remote control unit connector cap of the main unit. Then, insert the connec- tor of the remote control unit to the connector of the main unit, and rotate the connector of the remote control unit clockwise to connect the remote control unit.

  • Page 42: Connecting The Sdhc Card/Usb Flash Drive

    3-8 Connecting the SDHC card/USB flash drive  Loading the SDHC card Open the connector cover Noting the orientation of the SDHC card, insert the SDHC card to the end until the “click" sound is heard. Then, close the connector cover. { Removing the SDHC card Push the SDHC card once to remove the SDHC card.

  • Page 43: Attaching/Removing The Shoulder Strap

    IPLEX NX 3-9 Attaching/removing the shoulder strap The shoulder strap lets you to carry the main unit easily on the shoulder.  Hanging the main unit on the shoulder Attach the shoulder strap hooks to the two belt brackets. Adjust the length of the shoulder strap by the length adjuster buckle. Hang the shoulder strap on your shoulder and hold the shoulder strap firmly with your hand.

  • Page 44: Attaching The Hook Assembly

    3-10 Attaching the hook assembly Insert the hook assembly from the channel of optical adapter as described below. WARNING For details, refer to “ Safety precautions - Hook assembly precautions -” (page 7). Loosen the chuck screw on the channel port so that the hook assembly can be passed through it.

  • Page 45: Replacing The Hook

    IPLEX NX 3-11 Replacing the hook The hook is replaceable. To attach hook to the spring shaft, follow the procedure below. WARNING For details, refer to “ Safety precautions - Hook assembly precautions -” (page 7). Check the screw thread at the distal end of the spring shaft. If the end screws rattle or are misaligned, do not use the spring shaft and use a new hook assembly instead.

  • Page 46: Replacing The Safety Cap

    3-12 Replacing the safety cap WARNING For details, refer to “ Safety precautions - Hook assembly precautions -” (page 7). Holding the strap, firmly pull the safety cap from the universal cord and separate the fixing ring. Open the fixing ring on the new safety cap, and attach to the universal cord in the recess shown in the following diagram.

  • Page 47: Using The Channel Port Grip And The Belt Clamp

    IPLEX NX 3-14 Using the channel port grip and the belt clamp You can hold the channel port and the remote control unit securely with one hand by using the channel port grip.  Attaching the channel port grip and the remote control unit Insert the opening of the channel port grip all the way to the spring shaft of the channel port (arrow 1.).
  • Page 48 If the channel port grip cannot be attached or removed because the lock ring cannot be turned, stop using the equipment and contact Olympus. Attach the remote control unit on the remote control unit mount of the channel port grip.
  • Page 49 IPLEX NX By using the belt clamp, you can secure the channel port and the remote control unit attached to the channel port grip to the side of your body.  Attaching the belt clamp and the channel port grip Attach the belt clamp to a belt or pants.

  • Page 50: Pre-Operation/Post-Operation Inspections

    Any cracks or scratches on the remote control unit, Replacement LCD monitor, insertion tube or connector covers? required. Contact Olympus. Any irregularities such as damage to or deformation of the exterior materials, buttons, joysticks, or levers? Any irregularities such as tear or kinks on the remote...
  • Page 51 Any surface cracks or other abnormalities on the Replacement monitor screen? required. Contact Olympus. The LCD monitor is manufactured based on precision technologies. The LCD monitor may contain pixels that do not light (visible as black dots) or light permanently (visible as bright dots).
  • Page 52 Item location discovered Channel Any strong resistance in the hook assembly? Contact Olympus. Inserting the hook assembly into the scope forc- ibly may damage the scope unit and the hook assembly. Channel Any abnormal deformities or foreign objects in the Contact Olympus.

  • Page 53: Basic Operation

    IPLEX NX Basic operation 4-1 Turning ON the power Turning ON the power To turn ON the power, press the [POWER] button ( ) of the main unit approx. one second. After pressing the [POWER] button ( approx. one second, the [POWER] indicator lights up and the power turns on.

  • Page 54: Operating The Instrument

    4-3 Operating the instrument This instrument can be operated by the touch panel, buttons and joysticks of the LCD unit and the remote control unit (optional). For operations using the LCD unit and the remote control unit, see the following table. Touch panel of LCD Remote control unit Function...

  • Page 55: [Meas/Enter] Joystick

    IPLEX NX Touch panel of LCD Remote control unit Function unit Selects the menu or moves the cursor. Switches the save destination folder of the image on the live screen. [MEAS/ENTER] joystick Switches the selected image on the (Joystick operation) thumbnail screen.

  • Page 56: Observing The Inspection Object

    4-4 Observing the inspection object Turn ON the illumination. While looking at the display screen, insert the insertion tube into the inspection object. Insert the insertion tube carefully while checking the insertion direction. Use the [ANGLE/LOCK] joystick to perform angulation operations and observe the applicable areas on the display screen.

  • Page 57: Withdrawing The Scope Unit

    IPLEX NX 4-5 Withdrawing the scope unit Remove your finger from the [ANGLE] joystick and carefully observe as you withdraw the scope unit.  Troubleshooting when the hook is caught Protrude the hook assembly from the channel of optical adapter and turn the hook assembly to unhitch the hook.

  • Page 58: Adjusting The Image Display

    4-6 Adjusting the image display Still image (Freeze) While a live image is displayed, press the [FREEZE] button. The observed image is frozen and the freeze icon ( The observed image is frozen and the freeze icon ( ) is displayed in the upper right corner of the LCD monitor.

  • Page 59: Switching The Folder On The Live Screen

    IPLEX NX  Manual mode In Manual mode, the brightness is fixed regardless of the conditions of the observation image. If you select this mode for observing the image which contains the motion and the significant contrast, as the brightness does not change, you can observe the image clearly. Long-tap the [LIVE] button while a live image is displayed.

  • Page 60: Recording Images

    4-8 Recording images The images being observed can be recorded in the image recording media (SDHC card) as still images or movies. Only still images can be recorded in the USB flash drive. Use the provided SDHC card or the recommended SDHC card. Use the recommended USB flash drive.
  • Page 61 · If <ON> is set in the <FILE NAME MARK> menu, you can add the letter “_A”, “_B”, “_C” or “_D” at the end of image file names. Use this function to categorize image files. · The category names of the file marks can be changed. (Contact Olympus for details.)

  • Page 62: Recording The Still Image

    Recording the still image Select the folder of the save destination. Tap the up/down/left/right button ( Tap the up/down/left/right button ( ) to select the folder of the save destination (see page 51). While the live image is displayed, press the [FREEZE] button. The image is frozen.
  • Page 63 IPLEX NX Select the strings in the preset title list registered in advance. For procedures to register the preset title in advance, see “3 Registering a text string as a preset title” (page 69). The still image is recorded. The screen goes black for a moment and then the frozen im- age is displayed.

  • Page 64: Recording The Movie

    Recording the movie Select the folder of the save destination. Tap the up/down/left/right button ( Tap the up/down/left/right button ( ) to select the folder of the save destination (see page 51). While the live image is displayed, long-press the [RECORD] button. The folder name of the save destination appears.

  • Page 65: Appending The Movie

    IPLEX NX Select the strings in the preset title list registered in advance. After the still image is recorded, the movie recording confirmation dialog appears. Select <YES>. The recording of the movie and the sound start. The red circle icon blinks on the LCD monitor while the movie recording is in progress.

  • Page 66: Playing Back The Image

    4-9 Playing back the image Recorded images can be displayed using either of two screen views: a full-screen view of a single image (view screen) or a multi-image view of thumbnail images (thumbnail screen). The thumbnail screen shows multiple images at a single glance, which makes it useful when finding a particular image among a large group of images.

  • Page 67: Playing Back An Image In A Full-Screen View (View Screen)

    IPLEX NX Playing back an image in a full-screen view (View screen) Select the folder of the save destination. See “4-7 Switching the folder on the live screen” (page 51) for details about operations. Tap the [VIEW] button on the live screen or the freeze screen. The recorded image is displayed in a full-screen view.

  • Page 68: Sound Attached To The Still Image

     To select a thumbnail image Tap the up/down/left/right button ( Tap the up/down/left/right button ( ) to move the frame. The image framed is the image being selected.  To play back an image Select the image to be played back and tap the [ENTER] button or tap the image to be played back. The selected image is played back in a full-screen view.

  • Page 69: Displaying Live Images On The External Monitor

    The images recorded with this instrument can be used on a PC with InHelp VIEWER. The recorded images are loaded directly on a PC from the SDHC card or the USB flash drive containing those images. To use InHelp VIEWER software, download it from the Olympus website (http://www.olympus- ims.com/en/service-and-support/downloads/).

  • Page 70: Menu Operations And Functions

    Menu operations and functions 5-1 Menu operations This instrument can be operated either with the remote control unit or the touch panel.  Using the touch panel When operating this instrument with the touch panel, tap icons on the screen. The operation icons are displayed.
  • Page 71 IPLEX NX  Using the remote control unit Press the [MENU] button. The menu screen is displayed. Operate the [MEAS/ENTER] joystick up, down, left or right to select the menu item you want to execute. Press the [MEAS/ENTER] joystick to apply the settings and return to the previous screen.

  • Page 72: Using The Live Screen/Freeze Screen

    5-2 Using the live screen/freeze screen Initial setting menu When you turn ON the power of this instrument, the live screen appears. Tapping the [MENU] button on the live screen and/or the freeze screen allows you to set the following settings. Main menu Sub menu Item...
  • Page 73 IPLEX NX Main menu Sub menu Item <IMAGE MODE> <STEREO Selects the screen in <MONOCULAR IMAGE> or ADAPTER IMAGE <BINOCULAR IMAGE>. DISPLAY MODE> Sets the live image whether to display in monocular view or binocular view when the stereo optical adapter is attached.
  • Page 74 Main menu Sub menu Item <SYSTEM <DISPLAY> Selects whether to show or hide the information on SETUP> the screen. <AUDIO VOLUME> Specifies the sound volume. Adjust the output sound volume according to the specified sound volume. The sound volume can be selected from <OFF>, <LOW>, <MEDIUM>...

  • Page 75: Inputting A Title

    IPLEX NX Inputting a title There are two methods shown below that can be used to input a title. • Input text from the on-screen keyboard • Select a preset title for input  Inputting text from the on-screen keyboard Select the input mode.
  • Page 76  Selecting a preset title for input With this procedure, you can select a preset character string and use it to input a title. Select <PRESET>. A list of preset titles is displayed. To cancel the preset title selection, tap the close button ) to close the screen.

  • Page 77: Registering A Text String As A Preset Title

    IPLEX NX Registering a text string as a preset title After you register the frequently used text strings as preset titles, you can recall them when you are inputting titles. You can register a maximum of 54 text strings to preset titles. Input the text string you want to register into the title input box.

  • Page 78: Adjusting The Image Sharpness

    Adjusting the image sharpness The frame sharpness of the image can be emphasized. <IMAGE MODE> - <SHARPNESS> Tapping the button will change the frame sharpness level. If you get the suitable sharpness, tap the close button ( Adjusting the image saturation The saturation of the image can be adjusted.

  • Page 79: Setting Date And Time

    IPLEX NX Setting date and time Use the procedure below to specify date and time. <SYSTEM SETUP> - <DATE TIME> Be sure to set the correct date and time before using the instrument for the first time. The date and time information is recorded on the print screen together with the screen information.

  • Page 80: Fine Mode Speed

    FINE MODE SPEED Specifies the angulation speed for the angulation lock. <SYSTEM SETUP> - <FINE MODE SPEED> Select either <SLOW>, <STANDARD> or <FAST>.

  • Page 81: Using The Thumbnail/View Screens

    IPLEX NX 5-3 Using the thumbnail/view screens File/folder operation menu The menu displayed on the thumbnail screen can be used for the following settings. Menu Available settings <DELETE> Deletes the recorded image. · <CANCEL> : Do not delete image. · <EXECUTE> : Delete image. On the thumbnail screen, the currently selected image or all images that are check-marked ( ) are deleted.
  • Page 82 The color of the folder name in the first layer is switched in conjunction with that in the second layer as follows. For example, the color of the folder name can express whether the image has been acquired or not. Long-tap the folder name in the first layer or...

  • Page 83: Stereo Measurement Function

    Measurements are done based on these coordinates. As the measurement results obtained here are affected by surface conditions of the measurement object or image capturing conditions such as the brightness, Olympus cannot guarantee the accuracy of measurement results. We recommend that users identify the measurement accuracy through experiments.

  • Page 84: Measurement Flow

    6-1 Measurement Flow The following shows measurement procedures and the screen flow. Attaching the stereo optical adapter (See page 77) Checking the serial number of the stereo scope unit, the abbreviated name and the serial number of the stereo optical adapter (See page 12 or 18) Checking measurement values (before measurement) (See page 78)* Capturing the measurement area (See page 80) Live screen...

  • Page 85: Attaching The Stereo Optical Adapter

    IPLEX NX 6-2 Attaching the stereo optical adapter See also “3-15 Pre-operation/post-operation inspections” (page 42) for more information on attaching stereo optical adapters. Make sure that the O-ring in the distal end is properly attached. See “3-5 Attaching and removing the optical adapter” (page 30) for information on how to check the O-ring.

  • Page 86: Checking Measurement Values

    When the stereo optical adapter is attached to the instrument, the stereo optical adapter is recognized automatically and the optical adapter confirmation dialog appears. Serial No. of stereo optical adapter Serial No. of stereo scope unit Check that Serial No. of the stereo optical adapter attached is consistent with Serial No.
  • Page 87 If the error range still exceeds the above value when checking measurement values for a few times, contact Olympus. Also, if the measurement values differ significantly between before and after measurement, inspect the adapter in the same way, and check measurement values again if necessary.

  • Page 88: Observing The Measurement Area

    6-4 Observing the measurement area Observe the measurement area and check that the image is appropriate for measurement. Use the spot ranging to confirm that the distance between the distal end of the stereo optical adapter and the measurement area is appropriate. Observing the measurement area on the live screen Observe the measurement area by setting your favorite display mode to either the <MONOCULAR IMAGE>...

  • Page 89: Measuring The Distance To The Measurement Area By Spot

    IPLEX NX Measuring the distance to the measurement area by spot ranging The spot ranging measures the distance between the distal end of the stereo optical adapter and the measurement area on the live screen and the freeze screen. While the live screen or the freeze screen is displayed, tap the [SPOT RANGING] button. The spot ranging screen is displayed.
  • Page 90  Measurement position of the object distance Display the circle centering the cursor position in the left image area. You can also confirm the object distance by the up/down/left/right points of the cursor position (on the circle). If you tap the up button of the [ZOOM] button , the circle can be enlarged up to 3 levels and the measurement position can be changed.

  • Page 91: Measurement

    IPLEX NX 6-5 Measurement Measurement While displaying the spot ranging screen, the live/freeze screen or the view screen (image recorded in the <BINOCULAR IMAGE>), tap the [MEASURE] button. The measurement method selection screen is displayed. · Acquire multiple images with different view points, and measure them. ·...

  • Page 92: Measurement Screen

    Measurement screen  Explanation of the measurement screen Item Product abbreviation Scope diameter Serial No. of stereo optical adapter Serial No. of stereo scope unit Measurement method icon Cursor zoom window Displays zoomed image around a specified point. Cursor Specifies a measurement point or reference point. Left image area Point Indicates a specified measurement point or reference point.
  • Page 93 IPLEX NX  Menu display and functions When the [MENU] button is tapped on the measurement screen. Menu Available settings <CLEAR> Clears the measurement point or reference point specified last. <ALL CLEAR> Clears all specified measurement points and reference points. <MODIFY>...

  • Page 94: Measurement Method Types

    Measurement method types The measurement method selection screen is displayed immediately after starting the stereo measurement or when <METHOD> is selected in the measurement menu screen. The following four measurement methods are available.  <Distance> This mode allows for measuring the distance between two specified measurement points. Place the cursor on both ends of the measurement area you want to measure and tap the [ENTER] button to specify the measurement points.
  • Page 95 IPLEX NX  <Depth> This mode allows for measuring the distance from a measurement point to the reference plane specified by three reference points. It indicates depth and height. Height is indicated by a positive value and depth is indicated by a negative value. Reference point Reference...

  • Page 96: Specification Of Measurement Points

    Specification of measurement points  Specifying and moving the measurement points Tap the position you want to move the cursor in the left image area. Tapping the up/down/left/ right button ( right button ( ) moves the cursor position gradually. Long-tapping the move button moves the cursor position continuously.
  • Page 97 IPLEX NX Modifying the point To correct the position of the measurement points or reference points (left image area), or corresponding points (right image area), select <MODIFY> in the measurement menu. Tap the <LEFT IMAGE> to correct the measurement points or reference points, or tap the <RIGHT IMAGE> to correct the corresponding points.
  • Page 98 <3D OPTION> The object for measurement can be displayed in 3D. Select [3D option] on the measurement menu screen, and select the view mode from <2D/2D>, <2D/3D>, <3D>, <2D/3D (color map)> or <3D (color map)>. If the view mode is <3D> or <3D (color map)>, you cannot specify the measurement points or reference points.
  • Page 99 IPLEX NX Touch panel of LCD unit Remote control unit Function [MEAS/ENTER] joystick Switches between rotation and parallel short-press movement. Changes the object for operation in [MEAS/ENTER] joystick binocular view to 2D view (left image long-tap long-press area) or 3D view (right image area). [MEAS/ENTER] joystick Rotates the 3D view or moves it in (Joystick operation)

  • Page 100: Scaler Measurement Function

    Scaler measurement function Scaler measurement measures the length of an object using the reference length value that is preset according to a known length inside the observation image. NOTE In other words, an accurate measurement cannot be obtained if the reference length is incorrect.

  • Page 101: Attaching The Optical Adapter

    IPLEX NX 7-2 Attaching the optical adapter Attach optical adapters, other than stereo optical adapters, to the scope distal end by following the procedure described in “3-5 Attaching and removing the optical adapter” (page 30). When the optical adapter is attached to the instrument, the optical adapter is recognized automatically and the following message is displayed.

  • Page 102: Measurement

    7-4 Measurement While displaying the live/freeze screen, tap the [MEASURE] button. The measurement screen is displayed. Specify the reference points. Place the cursor on each extremity of an object with a known length in the observed image and tap the [ENTER] button. Set the reference length.
  • Page 103 IPLEX NX  Menu display and functions of the scaler measurement screen Menu Available settings <CLEAR> Clears the measurement point or reference point specified last. Sets new reference length. <REFERENCE> <MEASURE> Sets new measurement points. <UNIT> Selects the unit of the measurement results. Selects <mm>...

  • Page 104: Troubleshooting

    Inspect the instrument as described in “3 Pre-operation preparation and inspection” (page 22). If there are any obvious malfunctions, do not use the instrument and contact Olympus for repairs. If a slightest irregularity is suspected, do not use the instrument and perform the actions described in “8-1 Troubleshooting guide”.

  • Page 105: Common Problems

    IPLEX NX Message Cause and recommended action <LOW BATTERY. The battery voltage is low. → Stop all operations, such as image recording, copying, PLEASE CONNECT TO THE AC ADAPTER OR TURN OFF THE POWER.> deleting and formatting the USB flash drive, etc., and immediately replace the battery.
  • Page 106 Problem Cause and recommended action The system cannot be The AC adapter or the battery is not connected. → Connect the AC adapter or the battery correctly (see “3-3 Preparing the turned ON. power supply” (page 27)). The power is not turned ON. →...

  • Page 107: Requesting Repair Of This Product

    8-2 Requesting repair of this product Contact Olympus when you request repair of this instrument. Include a detailed description of the malfunction and the conditions under which it occurs when returning the instrument. Malfunctions that occur during the warranty period are repaired at no charge according to the warranty agreement.

  • Page 108: Storage And Maintenance

    Contact Olympus about changing the battery. For details about how to load and remove the battery, see “1 Using the battery” (page 27). 9-2 Replacing the O-ring Apply the silicon grease to the spare O-ring provided with the optical adapter and replace it.

  • Page 109: Cleaning The Distal End

    IPLEX NX Cleaning the distal end Dirt or water droplets on the objective lens of the distal end Grasping the rigid portion of the distal end, use a clean, soft piece of gauze or a cotton swab to wipe off the dirt or water droplets. You could also use the brush to brush away dirt and water droplets.

  • Page 110: Cleaning The Hook Assembly

    Cleaning the hook assembly NOTE During cleaning, take care not to bend the spring shaft into a small curvature radius or apply an excessive force to the hook. Remove the hook assembly by reversing the procedure steps described in section “3-10 Attaching the hook assembly”...

  • Page 111: Storage Precautions

    IPLEX NX 9-4 Storage precautions Store this product under normal room temperature and humidity. Storing the instrument in the carrying case For procedures to store the instrument in the carrying case, refer to the label which describes the storing procedures, attached to the inner surface of the top lid of the carrying case. NOTE ·...

  • Page 112: Storing The Hook Assembly

    Storing the hook assembly Take out the hook assembly case from carrying case. Wind the hook assembly and place it in the hook assembly case. (Two hook assemblies can be stored in the hook assembly case.) Store the spare hook in the hook assembly case as well. Store the hook assembly case on the rear side of the main unit.

  • Page 113: Specifications

    IPLEX NX 10 10 Specifications 10-1 Operating environment Item Specifications Operating temperatures Insertion tube In air : -25 to 100 °C In water : 10 to 30 °C Parts other than In air : -21 to 49 °C (Battery-powered operation) insertion tube 0 to 40 °C (AC adapter-powered operation) Operating atmospheric pressure...

  • Page 114: Other Specifications

    10-2 Other specifications Other specifications Item Specifications Optical system For optical adapter specifications, see “10-3 Optical adapter specifications” (page 111). Illumination The white light in the scope unit is guided to the distal end of the insertion tube via the light guide. Distal end Outer diameter IV94 series : Ø4.0 mm...
  • Page 115 Input voltage : 100 V to 240 V AC Frequency : 50/60 Hz For details, refer to the instruction manual of the battery charger. Power 45 W consumption Recording media SDHC card and USB flash drive (For recommended products, please contact Olympus.)
  • Page 116 Frame rate 60 fps Manufacturer OLYMPUS CORPORATION TOKYO, JAPAN · The images recorded with the instrument can be played back on a computer, etc., but the images recorded with image recording devices such as a digital camera or a personal computer cannot be played back with the instrument.

  • Page 117: External Application Standard

    In accordance with European Directive on Waste Electrical and Electronic Equipment, this symbol indicates that the product must not be disposed of as unsorted municipal waste, but should be collected separately. Refer to your local Olympus distributor for return and/or collection systems available in your country. Chinese RoHS This logo is the logo to be applied to electrical and electronic products sold in China based on “Management Methods for the Restriction of the Use of Hazardous...

  • Page 118: Using Open Source Software

    Some of the OSS licenses associated with this product may permit you to obtain source code for certain software which Olympus has an obligation to provide in accordance with the terms and conditions applied to the OSS. You may obtain a copy of this source code from the following URL.

  • Page 119: Optical Adapter Specifications

    IPLEX NX 10-3 Optical adapter specifications For 4-mm type insertion tube When the optical adapter (optional) is mounted on the insertion tube. AT120D/NF AT120D/FF AT100S/NF AT100S/FF Adapter name -IV94 -IV94 -IV94N -IV94N Product abbreviation A120N A120F A100N A100F Character color Green Green Optical...

  • Page 120: For 6.2-Mm Type Insertion Tube

    For 6.2-mm type insertion tube When the optical adapter (optional) is mounted on the insertion tube. AT80D AT120D/NF AT120D/FF AT80S Adapter name -IV96X1N -IV96X1N -IV96X1N -IV96X1N Product abbreviation A120N A120F Character color Black Green Black Optical Field of view 80° 120°...
  • Page 121 IPLEX NX MEMO...

  • Page 122: Appendix

    Appendix System chart LAN cable Monitor (Commercially available) VGA cable (commercially available) (commercially available) Microphone (Commercially available) Scope stopper Shoulder strap S-VIDEO cable Long LCD cable (Commercially available) MAJ-2261 (optional) Base unit USB flash drive for recording images (Commercially available) LCD holding LCD holding adapter bracket...
  • Page 123 IPLEX NX Stereo scope unit ( optional ) Scope case (optional) 4-mm type 6-mm type • IV9435N-MD* • IV9635N-MD* 4-mm type, 6-mm type • IV9450N-MD* • IV9650N-MD* • MAJ-2262 • IV9435N-MDS** • IV9675N-MD* 4-mm type, 6-mm type and 6.2-mm type •...
  • Page 124 MEMO...

This manual is also suitable for:

Iplex nx iv9435nIplex nx iv9450nIplex nx iv9635nIplex nx iv9635x1nIplex nx iv9650nIplex nx iv9675n

Table of Contents