Figure 2.24 Remote "Start" Contact Connections - Mitsubishi Electric 1100A Series Owner Technical Manual

Refer to Figure 2.24 for a typical wiring configuration. Although this figure applies to the
remote start/stop terminals, the same wiring arrangement is used for emergency stop;
power demand; and battery temperature high.

Figure 2.24 Remote "Start" Contact Connections

UPS Cabinet
Relay Coil current: 10mA
Details of input contacts for remote access : IOAU-12
Terminals 3 to 4
Used to perform a remote UPS Emergency Power Off (EPO).
The load will be dropped.
NOTE: The UPS is equipped with a selectable input contact item.
The above items are the default settings. MITSUBISHI ELECTRIC
POWER PRODUCTS, INC for setup information.
CAUTION: In all cases, a switch having a protective cover is
CAUTION
1100A SERIES UPS
OWNERS / TECHNICAL MANUAL
Relay
Start
Coil
Common
24 VDC
"Remote EPO" contact input
recommended in order to reduce the possibility of
accidental operation.
MITSUBISHI ELECTRIC 1100 SERIES UPS
Page Number:
2-11
External to
UPS Cabinet
Start
Switch
0.5S - 4S
ON
OFF
Use Momentary
Switches Only
User supplied