MRC AD332 Quick Start Manual

FCC COMPLIANCE
This device complies with the part 15 of FCC rule. Operation is subject to the following two
conditions. (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that cause undesired operation.
RETURN PROCEDURE
If it should become necessary to return your decoder, unplug the decoder and return the decoder
only. Please include a letter (printed clearly) with your name, address, a daytime telephone
number, and a detailed description of the problem you are experiencing. Please also include a
$9.00 check for handling and shipping fee. Be certain to return the decoder only.
Send the decoder to:
Model Rectifier Corporation
Attn: Parts & Service
80 Newfield Avenue
Edison, NJ 08837-3817 U.S.A
     2003 MODEL RECTIFIER CORPORATION
80 NEWFIELD AVENUE, EDISON NJ 08837-3817
INS-2273
Tel. 732-225-6360
PRINTED IN USA
AD332 'N' Gauge Decoder
Congratulations! You have just purchased an an advanced
DCC locomotive decoder. Combined with any DCC System,
our decoder will make your model railroad more realistic
and exciting. Thank you for purchasing MRC products.
•
Designed for N scale
•
Maximum current: 0.75 amp
•
Programmable for either 2-digit (1-127) or 4-digit
(1-9999) addresses
•
Programmable start voltage
•
Programmable acceleration rate
•
Programmable deceleration rate
•
Programmable top voltage
•
Programmable 14, 28 or 128 speed steps
•
Directional lighting control for front and rear
lights at 0.2 amp rate
•
Compatible with NMRA DCC standard
•
Complies with the Part 15 of FCC
•
28.0mm long x 8.5mm wide x 2.5mm high