Advertisement
6. The IR blaster can control wall-mounted HVAC systems, heaters, televisions and any other
electronic devices that use an infrared signal with a known Pronto code. A list of codes can be found
at either of these two websites:
http://irdb.tk/
http://www.remotecentral.com/cgi-bin/codes/
To use, place the IR blaster so that it is three to five feet from the item to be controlled, facing the
item's infrared receiver.
Figure 10: Face of the IR Blaster
Next, navigate on your browser to your kit's dashboard. Click on the Environment tab on the left
hand side. You will be presented with a screen which includes a place where the Pronto code can be
entered as shown in Figure 11.
Figure 11: Entering Pronto codes for the IR Blaster
Smart Building User Guide | Proprietary Information | Semtech Corporation
Advertisement
