Advertisement
3. Once the computer is connected to the mini-hub, open a web browser and type 192.168.4 in the
address bar.
4. Edit the WiFi SSID and WiFi Password to reflect the new WiFi network you want to connect to. Click
Apply to save your changes.
Mini-Hub LED status indicators and button functionality
LED indicators
Table 1 shows what the various LED colors and blink patterns displayed by the mini-hub indicate.
Color(s)
Blink Pattern
GREEN
blinking 1 sec
GREEN
blinking 1/4 sec
GREEN
Solid
GREEN/
blinking 1/4 sec
ORANGE
ORANGE
blinking 1/4 sec
ORANGE
blinking 1 sec
Table 1: LED Status Indicators
Button Functionality
To switch from GW (gateway) mode to CONFIG mode, press the Setup button for 10 seconds.
To reboot the mini-hub, while in CONFIG mode, press the Setup button for 5 seconds.
To return the mini-hub to factory settings, (and delete the Wi-Fi and LoRaWAN Network Server
credentials), press the Reset button for 5 seconds.
Smart Building User Guide | Proprietary Information | Semtech Corporation
Mode
Status
GW
WiFi STA not connected
GW
WiFi STA connected, establishing connection to LNS, configuring radio
GW
WiFi STA connected, Sta on connected to LNS, radio listening
GW
WiFi STA connected, CUPS transaction in progress
Note: Do not unplug device in this state
CONFIG
Scanning WiFi networks, setting up configuration AP
CONFIG
Configuration AP active
Advertisement
